How to change the Windows 10 interface language without reinstalling the system?

For the full version of the article with all additional video tutorials, see the source: https://hetmanrecovery.com/ru/recovery_news/how-to-change-the-language-of-the-windows-10-interface-without-reinstalling-the-system.htm

Read, how to change the interface language of Windows 10 without reinstalling ... What system language can be installed and what is needed for this, what settings need to be changed.

How to change the Windows 10 interface language without reinstalling the system?

Introduction

В Windows 10 users usually choose the preferred default language for the entire system directly during the installation of the operating system. However, if the wrong language settings were selected, or users were forced to use computer devices that were preconfigured according to certain language criteria, then some effort would be required to correct the settings if they were different from personal preferences.

Therefore, if there is a need to change the language settings Windows 10 on their own computer, users can quickly perform this procedure using the capabilities of the application "Options" without using a complete reinstallation of the operating system.

In this guide for managing settings Windows 10 we will tell you how to change the default system language to any other one of the user's choice, including for existing and new accounts.

How to change the default system language in Windows 10 ?

If users are forced to move to another region, there is a need to use a different interface language or the device was initially configured with an incorrect language configuration, then there is absolutely no need to reinstall Windows 10 ... Users only have to change a few settings of the software platform to set the correct operating system language.

Disable language synchronization

If users are using an account Microsoft , then the applied language settings will be synchronized between all connected devices. If you plan to change the regional and language settings for only one computer, then you must disable the ability to synchronize these settings before making any changes.

To disable language synchronization in the operating system Windows 10 users will perform the following step-by-step algorithm.

  • Open the system application "Options" ... You can use various methods to activate the application. For example, click on the button "Start" located on "Taskbars" in the lower left corner of the desktop, and open the main user menu Windows ... Using the scroll bar slider or the control wheel of a hand pointing device (computer mouse), find and select, in the list of applications and programs installed on the computer device, the section "Options" , or click on the button "Options" located in the left sidebar of the custom menu, and the application you are looking for will be launched immediately.
How to change the Windows 10 interface language without reinstalling the system?
  • Using the slider of the scroll bar or the mouse wheel, find on the main page of the application window, and select the tab "Accounts" .
How to change the Windows 10 interface language without reinstalling the system?
  • In the left sidebar of the responsible tab, go to the section "Synchronizing your settings" .
  • Then in the right pane of the window under "Synchronization of individual parameters" find, using the hand wheel or scroll bar slider, the line "Language settings" , and set the corresponding switch to position "Off" (disabled).
How to change the Windows 10 interface language without reinstalling the system?

After completing these steps, users can now start changing the language settings of the operating system Windows 10 without fear that they will affect similar settings of other related devices.

Direct procedure for changing the system language

To change the operating system interface language Windows 10 , users need to close all running active applications and follow the sequential sequence of actions presented below.

  • According to the personal preference of each user, use either the previously presented method or any of the many methods available in the operating system. Windows 10 , and run the application "Options" ... For example, press the key combination together Windows + X or right click on the button "Start" located on "Taskbars" in the lower left corner of the screen, and open the menu "Power user" , in which select from the list of available system applications, the desired section "Options" ... And the specified application will be instantly launched.
How to change the Windows 10 interface language without reinstalling the system?
  • Use to navigate application tabs "Options" mouse wheel or scroll bar to find and select a tab "Time and Language" .
How to change the Windows 10 interface language without reinstalling the system?
  • On the page of the marked tab, go to the left sidebar of the window to the section "Tongue" .
  • Now in the right pane of the window, find the section "Preferred languages" responsible for setting the priorities of user language configurations of the system, and click on the button "Add language" containing in addition to the text name an additional addend character "+" (a plus).
How to change the Windows 10 interface language without reinstalling the system?
  • In the pop-up panel "Select a language for installation" manually find the required language sample, using the mouse wheel or the scroll bar, or enter the search term in the search bar.
  • Select the language pack you plan to use in Windows 10 , from the list of available samples or the provided search engine result.
How to change the Windows 10 interface language without reinstalling the system?
  • After selecting the priority sample, press the button "Further" .
  • On the next page "Installing language components" set the selection indicator ( Tick ) in row cell "Installing a language pack and corresponding Windows interface language" , confirming its choice (the cell will be colored active blue).
How to change the Windows 10 interface language without reinstalling the system?
  • Click the button "Install" at the bottom of the window.

The changes will take effect after the language pack is installed, and the entire process may take several minutes. In some cases, it may be necessary to reboot the operating system. Windows 10 , upon completion of which, the configuration of the language pack will be applied to all elements of the system. The change will necessarily affect the login screen, application "Options" , file explorer Windows , desktop, applications, browser and websites that you visit. They will now use the new default language. In addition, depending on new introductions, Windows 10 may prompt users to revise their privacy settings.

Change region settings

If users change the system interface language Windows 10 , because they are located in a different region, then the corresponding settings of the regional representation must also be updated separately.

To change the preset region settings in the operating system Windows 10 users will need to follow a step-by-step sequence of actions.

  • Using any preferred method, open the system application "Options" ... For example, press the key combination together Windows + I and achieve instant launch of the corresponding application.
  • In the list of available tabs presented on the main page of the application window "Options" , find and select, from the available options, the tab "Time and Language" .
How to change the Windows 10 interface language without reinstalling the system?
  • In the left sidebar of the window responsible page, select the section "Region" .
  • In the right pane of the window in the section of the same name "Region" use the cell dropdown menu "Country or region" to indicate your new geographic location if different from your current settings.
  • Then in the section "Region format" also use the dropdown menu to select the correct formats for displaying date and time values ​​in Windows if they differ from your region.
How to change the Windows 10 interface language without reinstalling the system?
  • Now in the left sidebar, re-navigate to the section "Tongue" .
  • Use the scroll bar slider or mouse wheel to find the section "Related parameters" and click on the text link "Administrative language settings" .
How to change the Windows 10 interface language without reinstalling the system?
  • In a new pop-up window "Region" in the tab "Additionally" in section Welcome Screen and New User Accounts click on the button "Copy parameters" .
How to change the Windows 10 interface language without reinstalling the system?
  • A new window will display the corresponding screen and account settings. In section "Copy current parameters to" set the selection indicator ( Tick ) in each of the cells of the lines Welcome Screen and System Accounts и "New User Accounts" respectively.
How to change the Windows 10 interface language without reinstalling the system?
  • Click the button "OK" .
  • Press the button again "OK" again and then completely reboot the system.

After completing the above steps, your computer will display the correct region settings based on the user's physical location.

Typically, users do not need to regularly change or install additional languages ​​for personal use. This ability to change language packs is usually useful and often requested by small and large organizations working with users who may have different language preferences.

In addition, this function will be useful when users move to another region and want to comply with local settings. Or when buying a new computer from another country, because this device configuration is not available locally.

It should also be borne in mind that when changing language settings, users may lose certain functions, for example, "Cortana" because digital assistant services are not supported in some regions.

Conclusion

Personal computer devices, due to their inherent capabilities, allow them to be fully involved in the execution of a variety of highly costly and time-consuming processes.

A huge help in the daily operation and error-free functioning of computers is provided by a universal operating system designed for wide use on various types of model samples of computing devices. Windows , available today in its newest version Windows 10 .

The system not only fully reveals the full potential of a computer device, but also allows users to change their various settings, setting the system configuration as much as possible in accordance with the individual preferences of each specific user.

One of the available parameters, which can be personalized, is to set a new priority interface language. And if the corresponding need arises, then using the presented methods, users will be able to quickly replace the language pack without reinstalling the operating system Windows 10 by applying the desired option from the many available samples to choose from.

For the full version of the article with all additional video tutorials, see the source: https://hetmanrecovery.com/ru/recovery_news/how-to-change-the-language-of-the-windows-10-interface-without-reinstalling-the-system.htm

The interface language in Windows 10 is selected when the operating system is installed. But after the installation procedure is completed, it can be changed. This requires a language pack.

What is a language pack for?

A language pack (hereinafter referred to as "YAP" for brevity) is a set of words and sentences that provide translation of the system into a specific language. For example, by installing Russian YAP, you will translate all system messages, applications and settings into Russian. Accordingly, by choosing a language program of another language, you can use Windows in the language most convenient for you.

Installing YaP

Windows 10 has several built-in methods that allow you to work with Java. Thanks to them, you can choose a language from already downloaded packages, as well as install new languages.

If you need to change the PL on one computer, then the easiest way is to use autoload, that is, let the system download and install the necessary package itself. If you need to change the language on several PCs, then it is more convenient to download the YP file once, and then transfer it using a USB flash drive to each of the computers, thereby saving Internet traffic. JAP files have the extension .cab. You can download them from third-party resources, since Microsoft does not distribute Java as separate files on its official website.

Installing YaP using Windows Settings

Windows 10 has a built-in Settings utility that lets you manage your system settings. If the OS on your computer has already been updated to version 1803 April Update, then using this utility you can download an additional JAP. If you have an older version of Windows installed, then use any of the methods described below - the result will be the same. To load the programming language using the "Parameters" utility, do the following:

  1. Once in the Windows Settings console, expand the Time & Language block.

    Go to language settings in Windows options
    Open the Time & Language settings section

  2. Expand the "Region and language" sub-item, then click on the "Add language" button and select the appropriate option from the list that appears. The download of the JAP from the network will begin.

    Adding a new language in parameters
    After clicking on the "Add language" button, a list of languages ​​that can be added will open

As soon as the download is finished, a new language will appear in the list of languages ​​- select it to translate the system into the desired language.

Installing YaP from the Windows Control Panel

Users who have not yet updated their Windows to version 1803 or later can change the language code through the control panel. To do this, do the following:

  1. Once logged into the control panel, go to the "Language" section. The control panel can be found using the system search bar.

    Go to language settings
    Open the "Language" section in the Windows Control Panel

  2. Click on the "Add language" button to select the required language program. A list of languages ​​available for adding appears. Check the one you want to add.

    Adding a language to the control panel
    Click the "Add language" button and select the required language pack

  3. Go to the properties of the selected language.

    Go to language properties
    Click the Properties button for the added language

  4. In the language properties window that opens, click the "Download and install language pack" button, after which the JAP download will start.

    Start downloading a language pack
    Clicking on the button "Download and install the language pack", start downloading the language program of the selected language

  5. After finishing the process of installing the language software, go to the language properties again and set it as the main language of the system.

    Setting the main system language
    Set the selected language as the main Windows interface language

Done. The new language is loaded and applied. You may be asked to log out to apply the changed settings. Agree, then log in to your account again and check the result.

Adding a language from a cab file

If you have a separately downloaded JAP in cab format, then follow these steps to install it:

  1. Press the Win + R key combination to open the Run window. Enter the lpksetupe command in it and run it by clicking the OK button.

    Launching the language installer
    Enter and run the lpksetup command

  2. The JAP installation window will appear. Indicate that you want to download a new language, and not delete the existing one. To do this, click on the line "Set interface language".

    Choosing an action in the language installer window
    Indicate that you want to install a new language pack

  3. Open the cab file, for which click the Browse button and find it on the disk. The line next to the button will display the path to the file. If the file contains several languages ​​at once, select the ones that you want to install. Start the installation procedure by clicking the Next button and wait for it to complete. Then go to the "Options" window or to the Windows control panel, select the new Java as the main one (how to do this is described in the two previous paragraphs).

    Installing languages ​​from a cab file
    Specify the path to the file and select the desired languages

Change the interface language

Installing a new programming language does not guarantee that the system language will change. Usually for this you need to enter the appropriate command, which will change the interface language. Follow these steps:

  1. From the Control Panel, expand Regional Standards. If you can't find it in the main menu, use the built-in search bar.

    Go to setting regional standards
    Enter the "Regional Standards" section of the control panel

  2. In the first tab "Formats" select the interface language that suits you, and then save the new values. You may need to log out and log back in for the changed settings to take effect.

    Selecting the interface language
    Select the appropriate interface language and save changes

Video: Working with Language Packs in Windows 10

Greeting language changes

If you want to see the same language as the interface language when you log in, then follow the additional steps:

  1. Expand the Advanced tab in the Regional Standards window. Click the Copy Settings button.

    Go to copy parameters
    Click the Copy Settings button in the Regional Standards window

  2. Check the box to ensure that the current language settings are copied to the welcome screen and to system accounts. Clicking OK then will save the new language for the welcome screen. Also, by marking the appropriate checkbox, in this window you can enable copying of the installed language to all new accounts that will be created in the future.

    Data copy activation
    Enable copying the current language settings to the welcome screen and to system accounts

Installing YaP on Single Language version

There is a special edition of Windows - Single Language. It includes only one language and does not allow loading additional programming languages ​​through the control panel or the "Parameters" utility. This is done so that an inexperienced user does not accidentally translate the system into a language that is not incomprehensible to him.

If you are faced with the fact that the version of Single Language is installed on your computer, and you need a new YAP, then use the method described in the paragraph "Adding a language from a cab file". You can install the package and start using it by first downloading the cab file from a third-party resource.

Changes to the program language

Third-party programs work in the language you selected during installation, but the applications and utilities built into Windows downloaded from the official Microsoft store rely on the system settings when determining the interface language. The language used is selected based on location data.

  1. To change the language in all standard Windows programs, open the Regional Options window again in Control Panel and go to the Location tab. Specify the country for which you want the language and save the changes. Most applications will then change their language.

    Location selection
    In the line "Primary location" select the required country from the list and click the OK button

  2. If you notice that some programs remain in the same language, then open the Windows Store app and run a forced update. Having supplemented their database with the necessary language, the applications will switch to the previously selected language.

    Launch auto-update apps in the Windows Store
    In the Windows Store, run a forced app update

Earlier versions of Windows 10 install language packs through Control Panel, and more recent versions install them through System Settings. The universal way is to install the YP using a cab file. After the package is installed, go to the regional settings and change the interface language, welcome and standard programs.

Rate the article:

(10 votes, average: 4.5 out of 5)

Share with your friends!

How to change the Windows 10 interface language without reinstalling the system?

Read, how to change the interface language of Windows 10 without reinstalling ... What system language can be installed and what is needed for this, what settings need to be changed.

How to change the Windows 10 interface language without reinstalling the system?

Content:

Introduction

В Windows 10 users usually choose the preferred default language for the entire system directly during the installation of the operating system. However, if the wrong language settings were selected, or users were forced to use computer devices that were preconfigured according to certain language criteria, then some effort would be required to correct the settings if they were different from personal preferences.

Therefore, if there is a need to change the language settings Windows 10 on their own computer, users can quickly perform this procedure using the capabilities of the application "Options" without using a complete reinstallation of the operating system.

In this guide for managing settings Windows 10 we will tell you how to change the default system language to any other one of the user's choice, including for existing and new accounts.

Go to view

How to add a language, change the toggle keys, or translate the Windows interface 🇷🇺 🇺🇦 🇺🇸

How to add a language, change the toggle keys, or translate the Windows interface 🇷🇺 🇺🇦 🇺🇸

How to change the default system language in Windows 10 ?

If users are forced to move to another region, there is a need to use a different interface language or the device was initially configured with an incorrect language configuration, then there is absolutely no need to reinstall Windows 10 ... Users only have to change a few settings of the software platform to set the correct operating system language.

Disable language synchronization

If users are using an account Microsoft , then the applied language settings will be synchronized between all connected devices. If you plan to change the regional and language settings for only one computer, then you must disable the ability to synchronize these settings before making any changes.

To disable language synchronization in the operating system Windows 10 users will perform the following step-by-step algorithm.

  1. Open the system application "Options" ... You can use various methods to activate the application. For example, click on the button "Start" located on "Taskbars" in the lower left corner of the desktop, and open the main user menu Windows ... Using the scroll bar slider or the control wheel of a hand pointing device (computer mouse), find and select, in the list of applications and programs installed on the computer device, the section "Options" , or click on the button "Options" , located in the left sidebar of the custom menu, and the application you are looking for will be launched immediately.

    Start
  2. Using the slider of the scroll bar or the mouse wheel, find on the main page of the application window, and select the tab "Accounts" .

    Options
  3. In the left sidebar of the responsible tab, go to the section "Synchronizing your settings" .

  4. Then in the right pane of the window under "Synchronization of individual parameters" find, using the hand wheel or scroll bar slider, the line "Language settings" , and set the corresponding switch to position "Off" (disabled).

    Settings / Accounts / Synchronize your settings

After completing these steps, users can now start changing the language settings of the operating system Windows 10 without fear that they will affect similar settings of other related devices.

Direct procedure for changing the system language

To change the operating system interface language Windows 10 , users need to close all running active applications and follow the sequential sequence of actions presented below.

  1. According to the personal preference of each user, use either the previously presented method or any of the many methods available in the operating system. Windows 10 , and run the application "Options" ... For example, press the key combination together Windows + X or right click on the button "Start" located on "Taskbars" in the lower left corner of the screen, and open the menu "Power user" , in which select from the list of available system applications, the desired section "Options" ... And the specified application will be instantly launched.

    Options
  2. Use to navigate application tabs "Options" mouse wheel or scroll bar to find and select a tab "Time and Language" .

    Options / Time and Language
  3. On the page of the marked tab, go to the left sidebar of the window to the section "Tongue" .

  4. Now in the right pane of the window, find the section "Preferred languages" responsible for setting the priorities of user language configurations of the system, and click on the button "Add language" containing in addition to the text name an additional addend character "+" (a plus).

    Options / Preferred languages ​​/ Add language
  5. In the pop-up panel "Select a language for installation" manually find the required language sample, using the mouse wheel or the scroll bar, or enter the search term in the search bar.

  6. Select the language pack you plan to use in Windows 10 , from the list of available samples or from the provided search engine result.

    Options / Preferred languages ​​/ Add language / Select language for installation
  7. After selecting the priority sample, press the button "Further" .

  8. On the next page "Installing language components" set the selection indicator ( Tick ) in row cell "Installing a language pack and corresponding Windows interface language" , confirming its choice (the cell will be colored in active blue).

    Options / Preferred languages ​​/ Add language / Select language for installation
  9. Click the button "Install" at the bottom of the window.

The changes will take effect after the language pack is installed, and the entire process may take several minutes. In some cases, it may be necessary to reboot the operating system. Windows 10 , upon completion of which, the configuration of the language pack will be applied to all elements of the system. The change will necessarily affect the login screen, application "Options" , file explorer Windows , desktop, applications, browser and websites that you visit. They will now use the new default language. In addition, depending on new introductions, Windows 10 may prompt users to revise their privacy settings.

Change region settings

If users change the system interface language Windows 10 , because they are located in a different region, then the corresponding settings of the regional representation must also be updated separately.

To change the preset region settings in the operating system Windows 10 users will need to follow a step-by-step sequence of actions.

  1. Using any preferred method, open the system application "Options" ... For example, press the key combination together Windows + I and achieve instant launch of the corresponding application.

  2. In the list of available tabs presented on the main page of the application window "Options" , find and select, from the available options, the tab "Time and Language" .

    Options / Time and Language
  3. In the left sidebar of the window responsible page, select the section "Region" .

  4. In the right pane of the window in the section of the same name "Region" use the cell dropdown menu "Country or region" to indicate your new geographic location if different from your current settings.

  5. Then in the section "Region format" also use the dropdown menu to select the correct formats for displaying date and time values ​​in Windows if they differ from your region.

    Options / Region Format
  6. Now in the left sidebar, re-navigate to the section "Tongue" .

  7. Use the scroll bar slider or mouse wheel to find the section "Related parameters" and click on the text link "Administrative language settings" .

    Options / Region Format / Language
  8. In a new pop-up window "Region" in the tab "Additionally" in section Welcome Screen and New User Accounts click on the button "Copy parameters" .

    Options / Region Format / Language / Advanced
  9. A new window will display the corresponding screen and account settings. In section "Copy current parameters to" set the selection indicator ( Tick ) in each of the cells of the lines Welcome Screen and System Accounts и "New User Accounts" respectively.

    Welcome screen and system accounts
  10. Click the button "OK" .

  11. Press the button again "OK" again and then completely reboot the system.

After completing the above steps, your computer will display the correct region settings based on the user's physical location.

Typically, users do not need to regularly change or install additional languages ​​for personal use. This ability to change language packs is usually useful and often requested by small and large organizations working with users who may have different language preferences.

In addition, this function will be useful when users move to another region and want to comply with local settings. Or when buying a new computer from another country, because this device configuration is not available locally.

It should also be borne in mind that when changing language settings, users may lose certain functions, for example, "Cortana" because digital assistant services are not supported in some regions.

Go to view

🥇 Top FREE Deleted Data Recovery Software for Windows in 2020

🥇 Top FREE Deleted Data Recovery Software for Windows in 2020

Conclusion

Personal computer devices, due to their inherent capabilities, allow them to be fully involved in the execution of a variety of highly costly and time-consuming processes.

A huge help in the daily operation and error-free functioning of computers is provided by a universal operating system designed for wide use on various types of model samples of computing devices. Windows , available today in its newest version Windows 10 .

The system not only fully reveals the full potential of a computer device, but also allows users to change their various settings, setting the system configuration as much as possible in accordance with the individual preferences of each specific user.

One of the available parameters, which can be personalized, is to set a new priority interface language. And if the corresponding need arises, then using the presented methods, users will be able to quickly replace the language pack without reinstalling the operating system Windows 10 by applying the desired option from the many available samples to choose from.

In this article, we will talk about how to change the system language on Windows 10, as well as how to install the Russian or English system interface on Windows 10.

[toc]

When you set up Windows 10 for the first time, you will be prompted to select your system language. Usually the need to change the system language stops here.

However, if after some time after installing Windows 10 you want to change the language, then we assure you, it's not too late! Perhaps you are using a computer with someone (visiting, someone else's house, apartment) who speaks a different primary language, or you have purchased a supported computer with a system language that you do not understand.

If you just need to change the language to your primary (spoken) language, then below are methods and instructions for this.

Remember! Even if you cannot read the language that is installed on Windows, you can always follow the images in this guide to change the language.

How to change the system language on Windows 10?

Method 1. Go to the "Languages" screen

To access the languages ​​screen, we need to go through system settings. First press the button "Start" , then the small gear icon on the left side of the menu.

How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 1. Click on the Start button and then select Settings.
  • In the window "Options" click "Time and Language" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 2. Click on the Time and Language button.
  • Click on "Region and language" on the left, the second down.
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 3. Click on Region and Language.
  • Click the button "a plus" Near "Adding a language" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 4. Click on the plus sign next to Add language.
  • Windows 10 will now display a list of languages. Fortunately, each language is listed with its own name as well as its name in the given system language. This means that even if you are using a computer configured for a language you cannot understand, you can find the language you want in this list. Select the language you want to use.
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 4. Select the required language that you want to use on Windows 10. To do this, just click on it with LMB.

Your chosen language may have additional options. For example, when we choose English, there are a number of languages ​​we can choose from. Use this to set the system language to suit you.

  • Once you've chosen your language, Windows 10 may need to download a language pack. You can check by returning to the screen where you pressed "Adding a language" ... You should find your selected language here. If it says "Language pack available" , press the button "Options" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 5. If under your language the inscription Language pack available is indicated, then click the Options button. Otherwise, click the Use as primary language button.
  • After entering the language options, click on the button "Download" to have Windows 10 install the updated pack for your language.
  • Then, once the package update process is complete, you can click on the button "Use as main language" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 6. Click the Use as primary language button.

Method 2. Change the language in the whole system

You can change the language of your account. This is useful if you bought a laptop or computer installed in a foreign language and you want everything to be in your own language.

  • To change the language system-wide, click "Start" , enter "Control Panel" and click the button that appears "Control Panel" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 1. Enter the key query in the search: control panel, and then click on the first result.
  • Set in lettering View: Large Icons and press "Regional standards".
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 2. Click on the Regional Standards icon.

At the top of the window that appears, click the tab "Additionally" ... Now press the button "Copy parameters ..." .

How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 3. Go to the Additional tab, and then click the Copy settings ... button.
  • A window will appear. Here you can set where and in what cases the system will work in the new language. Of course, you cannot make individual settings on this screen, but you can set your language as the default system language by checking two checkboxes at the bottom of the window:

How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?

This will set your language as the primary language of the system. Hence, your system will start completely working in another language.

  • Then press OK and then restart your computer. After restarting your computer, Windows 10 will start working in a completely different language, which you set as the main one.

How to install system English on Windows 10?

If you want your Windows 10 system to work in an English interface, then you need to follow the instructions:

  • First of all, you need to open the menu "Start" , and then click the little gear icon on the left side of the menu.
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 1. Click on the Start button and then select Settings.
  • In the window "Options" click on the inscription "Time and Language" .
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 2. Click on the Time and Language button.
  • Click "Region and language" left. Now click on the inscription «English (United States) " ... After that, three buttons will appear under the tongue, but you need to click on the button "Use as primary language."
How do I change the system language in Windows 10? How do I install English on Windows 10? How do I change the language on Windows 10?
Figure 1. Click on Region and language, then select your language, and click on the Use as primary language button.

If you want your computer to use multiple languages ​​on different accounts, or if you bought a computer with a pre-installed foreign language, you can always change it according to your needs. Now you know how to change the language on the account, and also apply the language changes system-wide.

Have you ever bought a computer that worked in another language? Was it difficult for you to install the language you needed? Tell us your stories in the comments below!

Video: How to change / set the Windows 10 interface language?

Video: How to install Russian on Windows 10?

In Windows 10, it became possible to change the interface language at any time, and this action does not take much time.

In today's article, we will look at how to add a language, change the interface language, how to change keyboard shortcuts for switching languages, etc.

Setting the language in Windows 10

For any actions to change the language, it is desirable that your account has administrative rights. Go to Start Menu => Options => Time & Language.

Select “Region and language” on the left side and click on “Add language” in the right column.

A window will open with all known languages ​​in alphabetical order, select the one you need and wait for it to load.

Returning to the "Time and language" window, you will see all installed system languages, click on any of them and you will see three options for use: use as the main language; options; delete. By clicking on the options you can download a language pack and different keyboards for that language.

You can also go through the Control Panel to “Clock, language and region” => “Language” - here are the classic language settings, with which you may be familiar from previous versions of Windows.

Change the interface language

Log in as the user who needs to change the language => go to the “Start” menu => Settings => Time and language => Region and language => if below the language you want to install as the main one says “Language pack available” - first press on it and from the options that appear, select “Options” => next to “Download language pack” click on “Download”, wait until the required package is downloaded and installed. If under the desired language it says “Language pack installed” (or perhaps you just installed it) click on it and select “Use as main language” from the options that appear.

In Windows 10 starting from v1803, to change the interface language, in "Region and language" next to "Windows interface language" select the required language from the list (the list contains only those languages ​​for which the language pack is installed).

After that, under the language will appear the inscription "This interface language will be used when you ...". Simply put, you need to log out and log back in, or restart your computer for the changes to take effect. The changes apply only to the user under which you are logged in!

Change the language of the welcome screen and new accounts

If you changed the language of your account interface, this does not mean that the language of the welcome screen will change. To make general changes to the interface language - you need to go to the control panel (one of the ways is to write “Control Panel” in the search bar and select it from the results found) => select the display type “large icons” in the upper right => find in the list and open “Regional Standards”.

Select the “Advanced” tab => click on “Copy parameters”.

In this window, you will see the current language settings for this user and other users of the system. You can check the “Welcome screen and system accounts” box to apply the current user's language settings to the welcome screen. You can also check the box “New user accounts” so that all new users will be created with the same language settings. After selecting the desired one, click on “OK” and close the control panel.

How to change the language switching keys in Windows 10

To change the keys for switching the language, you need to go to the control panel (one of the ways to write “Control Panel” in the search bar and select it from the results found) => open Language (large icons are used in the control panel view) => on the left side, open “Advanced options” => click on “Change language bar keyboard shortcut”.

Select the “Switch keyboard” tab => go to “Change keyboard shortcut”.

Place a full stop in front of the desired layout and click OK.

That's all for today, if something is not clear or there are any additions - write comments! Good luck 🙂

Read also:

After the release of the final version of the new operating system, many users continue to wonder how to change the interface language of Windows 10 or Russify the new product? The answer is quite simple: the process of Russification is similar to the methods that are suitable for Windows 7 and Windows 8.1, and changing the interface language at login can be done in various ways. However, if you are unfamiliar with these processes and want to consider them in more detail using the example of Windows 10, then it is worth reading some tips.

Change the login language for the Windows 10 operating system

You can change the language in Windows 10 using the Settings section. To do this, we perform the following actions:

  • We press "Start", "Parameters" and select the desired parameter.
How to change the default language of the Windows 10 operating system?
  • A new window will open. In the left menu, select "Region and language". Click "Add ...".
How to change the default language of the Windows 10 operating system?
  • A new window will open with a selection of the appropriate package. We choose the right one.
How to change the default language of the Windows 10 operating system?
  • After adding a new parameter, the corresponding item will appear in the settings. If you want to make it the interface language, click "Use as main language".
How to change the default language of the Windows 10 operating system?
  • It is worth noting that when logging into the system, the user is often faced with the need to enter a username and password. These characters are entered only in Latin. Therefore, if you are interested in how to set the default English input language on Windows 10, then you should select English in the same window.
How to change the default language of the Windows 10 operating system?
  • In the future, when you enter your login and password, English will be automatically used.
  • If you intend to change the data entry for only one account, and leave Russian or English for the other, you should do the following. Open the "Control Panel" and select the "Regional Standards" section in the "Small Icons" mode.
How to change the default language of the Windows 10 operating system?
  • A new window will open. Go to the "Advanced" tab and click "Copy parameters".
How to change the default language of the Windows 10 operating system?
  • We check the required parameters, put a check mark next to the item that suits you and click "OK".
How to change the default language of the Windows 10 operating system?
  • Now the welcome speech or new Windows 10 user accounts will be displayed in the specified language. You don't have to change it at the entrance.

The process of Russification of Windows 10

To Russify Windows 10, you need to press "Win + Q" and enter the query "language" in the search bar.

How to change the default language of the Windows 10 operating system?

After the results are displayed, select "Add a language".

How to change the default language of the Windows 10 operating system?

This will launch the Windows 10 Control Panels section to customize speech. Here you need to add the required regional parameter, in this case - Russian. To do this, click "Add a language".

A new window will appear, in which we select "Russian" from the list and click "Add".

How to change the default language of the Windows 10 operating system?

Then open "Properties ..." by clicking the appropriate button.

How to change the default language of the Windows 10 operating system?

We select "Download and install the language pack". This way you can install other languages.

How to change the default language of the Windows 10 operating system?

After installation, return to the settings window and go to the "Advanced settings" section. Select "Russian" in the system language and click "Save".

How to change the default language of the Windows 10 operating system?

After completing the above steps, it is worth restarting your computer with Windows 10 for the changes to take effect.

For more information on how to change the Windows 10 language to English by default, see the video:

How to change the language of Windows 10 - this question is asked by many users. When buying a laptop in foreign online stores, it happens that there are difficulties with the interface language settings. We will try to answer all the basic questions that arise in this case.

Change the system language on a Windows 10 computer

Unlike Windows XP, changing the language in Windows 10 is available for all Home and Professional versions (excluding regional versions, such as China only). Versions of "Single language" (as it used to be with Windows 8) do not have standard functionality for changing it.

You can take into account the slightly changed functionality of changing the language in the version of Spring Creators Update 1803. Next, we describe all the convenience methods:

Version 1803 and older

First, open Options - Time & Language - Region and language ... These parameters completely replace the settings from the control panel (in Insider assemblies, these settings are absent in the Control Panel), everything goes to a complete replacement of the classic settings with the new Settings.

Preferred languages - tool for downloading language packs. According to Microsoft, a special neural network is engaged in the current translation of the system, which should improve the quality of translation.

It is worth paying attention to the line "Apps and websites will be displayed in the first supported language from the list." ... To change the language of applications in Windows 10, you just need to put the desired value in the first place.

To the right of each item, you can see icons that indicate the presence of Text-to-speech, speech recognition, support for handwriting input.

By pressing the button "Add ..." , you can see the entire available list.

The interface language is responsible for switching this system parameter. The change is made by selecting the desired package, and to apply the changes, you need to log out.

The new version of Windows 10 makes the change process easier. There are no many different parameters that are responsible for different, but similar functions, but are located in different places (Settings and Control Panel).

Version 1709 and earlier (1703, 1607, 1511, and 10240)

The change process on previous versions is slightly different. Additional settings are formed in the settings in the control panel, but let's start in order.

Open Options - Time & Language - Region and language ... You will notice little difference from the previous method.

Adding a language allows you to select the package you want.

Procedure:

  • Add; Open Options and download the required package;

  • Press "Use as main ..." and log out to apply the changes.

Sometimes you cannot change the default menu language in the Windows 10 store, the problem is that the correct parameters are not set.

Open Control Panel - Clock, Language and Region - Tongue .

For standard applications (including the Store) to be displayed in Russian, it must come first, as indicated by the corresponding warning.

Priority selection is carried out with the Up and Down buttons.

Change the Windows 10 Welcome screen language

We figured out how to change the language of the interface and applications, but what if the welcome or lock screen is in English? There is a way out and this method also allows you to change the language when Windows 10 boots:

  • Open Control Panel and select Regional standards ;

  • The Region window will open, where you need to go to the Additional tab and click Copy parameters ;
  • When changing the parameters of the Welcome screen and the new user may get lost, so check the appropriate boxes to use the new parameters.

How to change the interface language on a computer in Windows 10 to Russian?

Not all users can change the system language, especially if he does not know it. We will show you how to change the language of the operating system on a Windows 10 laptop in pictures, using the example of English.

  • Open the start menu and click Settings (Options);

  • Discover Time & Language ;

  • Then open the Region & language tab, select Add language and in the search bar enter Russian or Russian ;

  • Then, Russian will appear, which you will need to click on and select Set as default ;

  • Then, to change to Russian, you need to log out. Right click on the start button or Win + X, then Shut down or sign out - Sign out (Exit).
Download a language pack for windows 10
How do I get to this step? Detailed instructions.

For some reason unknown to me, the process of changing the language of the operating system interface is very complicated in Microsoft Windows 10. When I wanted to change the system language from Russian to English, I ran into certain difficulties. For example, when opening the Regional Settings item in the Control Panel:

Control Panel \ Clock, Language, and Region \ Language

I saw a list of keyboard layout languages ​​(English, Ukrainian, Russian), and next to the Russian layout there was a note that this was the system language. At the same time, there was a note next to the Ukrainian and English layouts that the language packs were not available. If you press the Options button next to each of the languages, then the opened form still does not give any opportunity to change the system language. Other standard ways to change the system language, which worked fine in widows xp, windows 7 and windows 8, did not work in the top ten. Moreover, if you try to download the desired language pack for Windows 10 from the official Microsoft website, then nothing will work, because they simply are not on the official website.

So what do you do?

How can I change the system language in windows 10?

Here is a simple method I tested:

Control Panel \ All Control Panel Items \ Language \ Advanced settings

1. Open Control Panel .2. Go to section Control Panel \ All Control Panel Items \ Language \ Advanced settings

Download and install the Windows 10 language pack

3. In the form that opens, in the uppermost selection list, you have your current system language indicated. Select instead Use a list of languages ​​(recommended) / Use language list (recommended) ... Click the button Save / Save .

Выберите пункт Параметры справа от названия языка

4. Then return to the previous form. Next to the name of the language for which you want to download the language pack, there is a button on the right Options / Options ... Click on it.

Скачать и установить языковый пакет Виндовс 10

5. On the form that opens, after you have completed step 3 of this instruction, the item will appear Download and install the language pack / Download and install language pack - for the language that you want to activate as the system language of Windows 10. Click on this link.

Download a language pack for windows 10

6. Basically, that's all. At this step, Windows will start downloading the language pack, after which it will install it on the system and make it the default interface language.

These are the dances with a tambourine that must be done to change the interface language in windows 10. For some reason, not yet done step 3 then on step 5 there will be no way to download the new system language pack.

How to change the system language in Windows 10 Home Single Language

If you have an operating system version installed on your computer Windows 10 Home Single Language , this means that the system is initially preinstalled with only one language pack, according to the license you purchased. Therefore, this assembly of Windows does not provide for the function of changing the system language at all. But it is also possible to change the language even in the Single Language version. To do this, try the following steps:

1. Follow the appropriate link below, depending on the bitness of your operating system (32 or 64 bits), and download the language pack you need lp.cab ... Copy it, for example, to the root of the disk С(i.e., path = C: \ lp.cab ):

Windows 10 x64 (Build 10240) :

Windows 10 x86 (Build 10240) :

2. Run the CMD command line as administrator. To do this, press the keyboard shortcut WIN + X and in the window that appears on the left of the screen, click on the item Command Promt (Admin) ... At the command line, run the following commands one after the other:

2.1 Installing a new language pack:

dism / Online / Add-Package /PackagePath:C:\lp.cab

2.2 Displaying a list of installed languages ​​in the system:

dism / Online / Get-Packages

In the case of the Windows 10 Home Single Language version, in the list, find the language originally installed on the system that you want to remove and which begins with the text Microsoft-Windows-Client-LanguagePack-Package- ... Remember the identifier of this language (field Package Identity ), you will need it in the next step. Most importantly, do not confuse it with the language pack that you installed in step 2.1 .

2.3 Removing the original language pack:

dism / Online / Remove-Package /PackageName:Microsoft-Windows-Client-LanguagePack-Package~38bf3856ad587e45~amd64~ru-RU~10.0.10240.16384

Just don't forget in this command after / PackageName: specify your system language pack that you calculated in step 2.2 .

This completes the procedure, you successfully changed the system language in Windows 10 Home Single Language .

It seems unlikely that on a PC or laptop purchased in a computer hardware store, the preinstalled Windows 10 will be in English or another language, but such a scenario is also possible. But if so, is it worth making a problem out of it? Of course not, because nothing prevents you from changing the language of the system interface, especially since this can be done in different ways. Let's move on to their consideration, assuming that initially only one interface language is available in the operating system - English.

How to change the language in Windows 10

Changing the language in the Settings app

To change the interface language from English to Russian, you first need to download the appropriate language pack. Open the Settings app from the Start menu or by pressing Win + I and go to Time & Language → Language or Region and language.

Press the “Add a language” button in the “Preferred languages” block and select the language you need from the list that appears, in this example Russian.

Find it faster will help search, enter in its field "russia". Then we press "Next".

We mark at least the first and second checkboxes (3 and 4 are responsible for converting speech into text and handwritten input) and press the "Install" button.

After the download and installation of the language pack is complete, which will take some time, you will be prompted to log out. After entering the system, you will find the interface Russified.

If the Start menu and Settings application remain un-Russianized, restart your computer.

Note: In earlier versions of Windows 10, the procedure for changing the interface language is slightly different. In particular, in the "Preferred languages" section, you will first need to add a language to the list and press the "Settings" button, after which the button for downloading the language pack will become available. After the language is downloaded and installed, it will remain to set it as the default language in the same section "Preferred languages".

Installing the language from the Store

There is also an easier way to change the language - install it as an application from the Windows Store 10. Open the Windows Store and type in the search field “Local Experience Packs”.

As a result, you will receive a list of localizations, select the language you need in it.

Click Get. This will open the "Parameters" application and launch the installation wizard for the selected language, and you will only have to press the button to install the package. Further actions are no different from those described above.

Setting the language from the CAB file

If you have a language pack as a CAB or MUI file, you can install it offline. To do this, run the lpksetup command in the quick launch window (Win + R),

click in the window of the launched wizard "Install interface languages"

and provide the path to the language pack CAB or MUI. The latter must correspond to the version of Windows, otherwise it will not be possible to install it. After the package is installed, open the Settings application, go to the Time and language → Language section and select it from the Windows interface language list.

Change Windows language from Control Panel

In earlier versions of Windows 10 (before build 2004), you can also change the language from the classic control panel. Open the latter with the control command, switch, if necessary, to the “Icons” view mode (Large or small icons), find and run the “Language” applet. Then follow these steps:

1. Click "Add Language" and select the language you need from the list that opens.

2. Click the "Add" button to add it, and then click the "Options" link next to the added language.

3. In the next window, click "Download and install language pack" and wait for the package installation procedure to complete.

4. Return to the main window of the "Language" applet, click opposite the set language "Options", and then click on the link "Make this the primary language", that is, make the primary language.

5. Re-enter the system, or rather restart your computer.

Additional actions

After installing a new language, some interface elements, as well as the universal apps that come with Windows 10, may remain in their original language. To Russify applications, in the "Time and Language" section, switch to the "Region" category and select the country corresponding to the installed language.

After that, open the Windows Store, select "Downloads and Updates" from the menu and install the update packages for your applications. In principle, you don't need to do this, unless you have disabled automatic app updates, after a while Windows 10 will download and install the necessary language packs by itself.

Almost everything is ready, it remains only to set the language for the welcome screen and change users. To do this, in the "Language" section, click the link "Administrative language settings". In the "Region" window that opens, click "Copy parameters" and set the checkboxes for the options shown in the screenshot in the new window of screen parameters and accounts.

Save your settings and restart your computer. We also recommend changing the current language of programs that do not support unicode in the "Region" window. Click the Change System Language button, select your new language, save your settings and reboot. This completes the procedure for changing the language in Windows 10.

Tags for the article: Windows 10 System functions

Добавить комментарий