Brah-shkotovy node: Knitting scheme. What is applied for?

Bram-shkoty knot

Bram-shkoty knot

If you are an active recreation, you probably have to use cables or ropes at least once. They are a constant satellite of hiking, when you need to smash the tent, climb on the slope or raise the cargo to the height. Various types of nodes are used in mountaineering. This is one of the most popular types of tourism. Security cables are used for safety. To be prepared for all surprises during the journey, examine the varieties and techniques of knitting knots. One of the easiest and most popular types of fastening is the branded shkota node.

Description

Tourist nodes are the main and auxiliary. Basic bind two parts of the cable. It can come in handy for building a rope length or if for some reason it broke. Also, the node is needed to tie an additional rope to the main rope - for example, inventive, or attach the inventory. The main include: direct, weaving, counter, gefvine, squirrel and brand-shkoty, academic and other nodes. The auxiliary are marked, "dummy" and a hushed node.

All these connections come from the sea. In the old days it was only so possible to securely combine different elements of the design of ships. Brah-shkotya node is an improved and stronger variety of shkotov. It is also sometimes called double squirrel. The name of this group of nodes received from the element to snap the sailboats. With the help of Brahmschka stretch the lower edge of the sail to keep it from crushing. The first mention of such a ligament dates back to 1860.

According to the classification of Ashley, the brother-shkotoy refers to the category of so-called bayonets. This fundamental work describes all possible varieties of mating, the number of which is more than three thousand. The bayonets are the connection methods that the tension implies. With a weakening of the load, the plexus weakens, with time decaying.

That is, to use the brother-shkota node is best on the support.

He will not let, even if it comes to a very big weight - It is only about the fortress of the rope itself. However, the double squirrel node is stronger than normal. Due to the additional turnover around the main cable, friction increases. So the rope is not unleashed immediately after weakening the thrust. It was invented that such a solution was because the sails are not constantly in the stretched position, and it was necessary to connect that would not have to remake with every weakening of the wind. This method was widely used and in whale hunting. Garpun tied to the rope just this node.

What is applied for?

Of course, with the development of technologies, sailing ships and the guipped business switched rather in the category of exotic sports than practical crafts. To date, the brother-shkooth nodes are used if you need to connect two ropes of different diameters. This can happen, for example, if at hand there are no two characters. In addition to him, only the academic node can be applied to such an attachment. The advantage of Brah-Shkotoy will be simplicity and speed of execution. Even in the frost or hobs you will easily link the ropes with it.

I.e The scope of the use of nodes is mainly connected with tourism and active views. For example, in the mountaineering, the brah-shkoty node is used to fasten a thinner and elastic safety cable to the main or for garter inventory and other elements of equipment.

In addition to mountaineering, this maritime bunch is widespread in yachting, on the hunt and fishing. It is very convenient to fasten them fishing gear - after all, the coil cable often has a thinner cross section than the leash of glitter. In the same way, the network and sinks will be revealed.

During forest hikes, it is convenient to raise supplies and luggage upstairs to protect from the beast.

In the construction sphere it is used for insurance during facade works. During the campaign, everyone may occur. The branded squirrel will help when you need to split the tent, tie the logs for the raft or put a sail on the boat. It is important to have strong ropes of one thickness and print a knitting scheme.

Sometimes it is used in needlework when fixing clothes or shoes. To knit complex patterns with crochet or knitting, such a method of connecting different thickens and texture of the threads is also useful. Also use such an attachment to connect two identical synthetic cables that can slide. Additional loop reliably protects from slipping of the free end, even when the tension drops.

In any situation, when there are two ropes or threads of different diameters, a double squirrel node takes into business. This can happen on the track if your car broke and need to be copped with cables, as well as during work on the country site. Currently, there is even a separate sport for high speed tie nodes. In the Guinness Book of Records, even there is a record of Clinton R. Bailey, in 1977, the 6 different marine nodes in some ropes tied.

How to knit?

To tie a brother-shkota node, stick to a simple scheme of six steps.

  1. One rope of larger diameter form a loop. Leave the end of 10-15 centimeters long.
  2. Stretch a smaller rope inside the loop, also leave the end free.
  3. Wrap the free edge of a thin rope around the entire loop of a larger cable.
  4. Remove the end of a smaller diameter to itself so that both short parts are on one side of the node.
  5. Wrap a thick cable with a working end again, holding it to the right of the first loop. Shoot the edge to itself just as before.
  6. Tighten the design for both ropes.

For additional fixation, enhance the connection with auxiliary node. There is a reinforced species of such a compound - double. In order to tie it, repeat the turn around the thick cable twice.

To practice, we advise you to use ropes of different colors. So you quickly catch the essence and train muscle memory so that in the critical situation to tie the knot even with closed eyes.

If there is a need to tie such a bundle on one rope, then use the following scheme.

  1. Roll the loop holding it from tightening.
  2. The tail is soaked inward, spending under the loop, and turn around two times.
  3. Now the working end is stretched under the moving part of the loop and tighten.

If you compare with a single shkoty, it can be noted that such a method is stronger and more reliable. By adding another turn around the shoggy, the rope is not shifted when dropping or increasing tension. An ordinary squirrel is quickly unleashed when the load is reduced.

More information about how to knit a scraping rod, look in the video below.

Brahmshkotovy node how to knit

Brahmshkotovy node how to knit

To overcome obstacles (descents, lifts, crossings, traverses, etc.) on travel, especially mountain, ropes, carbines, safety systems and various nodes are used. Each tourist is important to know how it knits and where one or another node is applied. Nodes can be classified by their intended purpose.

1. Nodes for binding the rope of the same diameter: "straight", "weaving", "counter-", "grapevine".

2. Nodes for binding rope of different diameters: "Academic", "Brahmshkotovy".

3. Nodes for insurance (unlocking loops): "Simple conductor", "Eight", "Mid Austrian conductor", "Double conductor".

4. Nodes for tosing rope to the support: "Remove", "Bulin", "Stirling."

5. Auxiliary nodes: "Casting", "Stirre".

The knot "Stirling" can be applied in two cases, but mobils will be different.

The node can be knitted in two ways: 1. The loop is made with one rope (Fig. 1, a), and the second rope the necessary revs to get the node, as in Figure 1, b. The running ends should be 15-20 cm long so that the control nodes can be tied (Fig. 7, e). If one chassis end is from above, and the other from the bottom, or vice versa, the node is tied incorrectly. The running ends should be exit or only from above, or only below.

Two ropes are superimposed on each other and two simple nodes are tied in different directions (Fig. 1, B, d). If the nodes are tied to one direction, then the "Babi node" is obtained (Fig. 1, e). Next, the control nodes are tied (Fig. 1, E).

Two ropes of the same diameter are taken, they are superimposed on each other, then the control unit appears first on one side (Fig. 2, a), then on the other (Fig. 2, b). Next, the nodes are tightened and control nodes are tied at the ends (Fig. 2, B).

Fig. 2. "Weavky" node

We take two ropes of the same diameter, at the end of one simple knot knit (Fig. 3, a), then the second rope towards the move end of the first rope completely repeat the node so that it turns out to be double and the running ends come out in different directions (Fig. 3, b) . After that, the node is delayed, the control nodes usually do not knit (Fig. 3, c).

Fig. 3. "Counter Knot"

Two ropes of the same diameter are superimposed on each other, the double control unit is tied on one side (Fig. 4, a), then the same with the other (Fig. 4, b). Nodes are tightened (Fig. 4, B). Control units do not knit. The correct knot pattern is shown in Figure 4,

Fig. 4. "Grapevine"

We take two ropes of different diameters, from a thicker rope we make a loop, and the running end is thinning it as shown in Figure 5, and, b. Then the node is delayed, straightens, and the control units (Fig. 5, B) are knit at both ends.

Fig. 5. "Brahmshkotovaya"

We take two ropes of different diameters, thicker make a loop, and drill a loop with the running end of a thin rope as shown in Figure 6, and, b. The node is delayed, straightens, on both ends the control nodes (Fig. 6, B) are knit.

Fig. 6. "Academic"

Node "Simple Explorer":

It knits in one rope, which is twice and at the end, a simple node is tied (Fig. 7, a, b) to get a loop. Below the control unit is tied (Fig. 7, B).

Fig. 7. "Simple conductor"

Knits one rope. It is twice and the node resembles the figure eight (Fig. 8, a, b) is tied at the end. The node is painted, delayed. The control unit does not fit (Fig. 8, c).

Fig. 8. "Eight"

Node "Malnal Austrian Explorer":

The knot knives on the same rope. The rope is taken at the middle, then the eight of it is turning 360 ° (Fig. 9, a), the vertex of which goes down and drags, as shown by the arrow in Figure 9, B to the loop come out. In order to get the right knot (Fig. 9, c), you need to stretch the ends of the rope in different directions. The control unit does not fit.

Fig. 9. "Malnal Austrian Explorer"

Knot "Double Explorer", or "Hare Ears":

Takes on the same rope. The rope is twice as well, "Dummy" knives (Fig. 10, a), is dragged (Fig. 10, c) and is tied so that it is unleashed, if you pull it for the loop. In the case when the "dummy" is tied to the opposite, the "Double Explorer" node will not work. The lower loop swept, as shown by the arrow in Figure 10, B so that two upper loops pass through it, and it is tightened for the upper loops to the node (Fig. 10, B).

Fig. 10. "Double conductor"

The correct knot is shown in Figure 10, it is necessary to monitor that when the node is tied the node there was no overlap. "Double conductor" does not have control nodes.

The knot knives with one rope around the support. The support belongs first by the running end, which serves to attach the rope, and then its working end, which is directly used by the tourist (Fig. 11, a). Next, the running end of the rope makes several revolutions around the working end (at least three) and the control unit is tied (Fig. 11, b). Then the node is delayed.

The knot knives with one end of the rope around the support. The end end of the rope is applied around the support, then knits as shown in Figure 12, but. After that, the node is delayed and fixed by the control node (Fig. 12, b). If the "Stirprise" node is used when attached to the support, it is delayed as stronger as possible, and the control unit knits as close as possible to the support.

The knot "Stirling" can be used as a point of foot support when lifting cracks. It is more convenient than the "conductor" and "eight", because it is easier to unleash and can be tied even with one hand (Fig. 13, a, b).

Fig. 13. "Stirling" as a leg support.

Knits one end of the rope around the support. Returning from the edge of the rope the desired distance, make a loop with a turn of the rope 180 ° clockwise, then the support is applied to the end end (in the figure shows the cross) and the end is done in the resulting loop (Fig. 14, a). The next action: a working rope is applied by the end end and it is done in the back of the reverse side (Fig. 14, b). The node is delayed and the control unit is tied (Fig. 14, B).

Bulin can be tied to another way, with the help of "pawners". To do this, instead of the loop, the "dummy" is tied up so that it is unleashed with a jerk for the working end, and not for the chassis. The support is applied by the end end (Fig. 15, a). Then he swears in the "pacifier" loop, and when stretching the working end of the pawned loop, along with the driving end passes through the node (Fig. 15, b). On the resulting node "Bulin" remains only to tie a control unit (Fig. 15, c).

Fig. 15. Bulin with the help of "pawners"

The node is tied with a reps (6 mm) on the main rope (with a diameter of 10-12 mm). The Repshunur is folded in half, the rope is applied (Fig. 16, a, b). The operation is then repeated (Fig. 16, B, d). After that, the node is delayed, the control unit is stripped and the control unit is tied (Fig. 16, e). The control unit is not needed if the reps are pre-tied to the loop by the "counter" or "grapevine" by the node.

Fig. 16. "Catching" node.

Sometimes a "grab" knot is tied by one end of the reps. The rope is drove by one reputant one side twice, then to another (Fig. 17, a, b, c). Then the node is tightened, straightens and is sure to be fixed by the control node (Fig. 17, d).

Fig. 17. "Catching" node in one end.

Additional nodes: "Dummy" node:

This node can be used when tie "Bulin" and "double conductor" nodes, as well as an independent node (for example, when tightening the top of the backpack). It is quickly and easily unleashed, if you pull out the ends in different directions.

Fig. 18. "Dummy".

Method of mating. The rope is taken after the middle and the simple node is tied (Fig. 18, a), but instead of tightening the ends, the tightened loop is made (Fig. 18, b).

This node is used to bind the rope after it is secure (Fig. 19).

Fig. 19. "Marking" node.

Fig. 20. "Bakhman Knot".

The node is a kind of "grabbing" and can be used for the same purposes. For carabiner knot, you can drive down and up, and with a sharp jerk, the node is delayed. It is easy to unleash after removing the load.

The reps rush into the carbine (Fig. 20, a), with open carbine, 3-4 turns are made (Fig. 20 b), then the carbine coupling is spinning, the node straightens and is delayed (Fig. 20, B).

The node is used to tie the rope to the support. It is used when the rope must be dragged after the descent, for example.

At the end of the rope, the "eight" is tied, the carabiner is lying in it (Fig. 21, a), then the rope is applied around the support and the carbine is lying into the working (load) end of the rope. The carbine clutch is spinning, and the node is delayed (Fig. 21, b).

Fig. 21. "Carabinal Remove".

Fig.22. Connecting parts of the safety system by a double bulin unit: A-. Before the chest strapping; b - initial loop; in - this piece of rope should be at least 2 m; M - Pokhlest Lower strand of a rope passing in the loops of the gazebo; d - loop gazebo; E - Loop of Samostrakhov 1.1 m long; W - Loop of Samostrakov with a length of 1.7 m

Brahmshkotovy Knot

One of the most reliable and indispensable ligaments is a branded knot - came from the time of creating a sailing ship. We will tell the story of the occurrence of weaving, the basic principles of ligaments and the scope of application.

What is a branded knot

The name of the ligament occurred from the shkota - 310 in order of gear, controlling the sail. A simple shock bundle was created for reliable bonding of two ropes capable of withstanding the strongest tension during the filling of the sail by the wind (Figure 1).

Its advantage was not only a large resistance to any tension, but also the ability to bind the ropes of different diameters. That is, Brahmyshkot hit the list of only two existing compounds (in addition to him, only academic), providing for the possibility of using the ropes of the different diameter of the section.

Advantages of the node

Brahmschkotovka weaving is distinguished by the universality of its use - it is suitable for any occupation, which includes handling threads or ropes. This list replenishes the knitting of the tourist nodes of brahlichkotov type, which are applicable to any sphere of outdoor activities.

Figure 1. It looks like a rope connection

The main advantage is the comparative ease of twisting in combination with the shortness of the manufacturing process itself. Having under hand two ropes or one rope, torn overhand, you can connect ends into several accurate movements.

The technique is distinguished by reliability and durability, and with due skill, the scroll of Brahmschkot is carried out during up to 30 seconds. However, the question remains open: what is the wider purpose of the node, which application will find a branded bunch in everyday life and how to master this technique from the first time.

Application area

As we mentioned above, the fundamental industry, which will find the application of the branded knot, is active leisure or emergency situations that require a reliable and long rope (Figure 2).

Modern yachting and mountaineering, autocouplements, construction (exterior trim of facades), the critical situation is always when it is necessary to link two end of rope of different diameter - Brahmskot comes to help.

Figure 2. Scope of applying an extensive connection: mountaineering, marine case and tourism

In Tourism, Brahmshkotovaya Knot plays a fundamental role: in building a tent camps, brave braves for the flesh, creating a handicraft sail, fastening fishing gear, creating a reliable climbing rope capable of withstanding heavy loads, as well as fixing clothes and shoes.

Types of Brahmshkotov Knot

There are two branded weaving - standard rod and double. The classic option is less resistant to rupture, however, is easier in manufacturing and dissolving, if you need the ropes used in the future.

Classical

The classic branded knot is ideal for bonding ropes requiring a steadily heavy load without reducing or increasing the voltage (Figure 3).

Figure 3. Classic knitting scheme

By history, Skotovaya Bundles Sailors tied the rope cables during bad weather and dismissed when the auxiliary fixation of the sail was not required. That is why this bundle is an effective exclusively in a static load. It is possible to strengthen the design.

Double

If the brahkotkotovny node is used for more moving structures, such as climbing equipment, then the weaving scheme is complicated. The complication will not affect the entire structure of the ligament, but only a little further.

The used Brahmyshkot twice turns around the loop. As in the case of classic, you will need two caskets to connect the brahmshkotovy node from the first time. To successfully consolidate the theory of practice, select two cables of different colors, preferably contrasting colors.

It is necessary for beginners to not get confused in threads. Next, we will tell, how to knit according to the scheme with an explanation.

Brahmshkotov Testing Technology Step

To weigh a simple classic rod or double brashkot, follow the instructions. When choosing codes for learning, stop the selection on an average diameter and non-slip material (Figure 4).

If you decide to try to link Brahmskot on one rope, and not on two, we will provide a scheme how to knit a knot with a rope one:

  1. Roll in half the main lace, holding the formed loop between the fingers.
  2. The running tip is watched into the hole, we carry under the main loop and wrap in such a way that a new loop appears, but another color. In it is inventing the tip and tighten.
  3. You can also initially fix the main lace with the oncoming sturden weaving.
  4. Shkotya weaving is ready.

Figure 4. The connection can be performed on one and two ropes.

After your familiarization with rod weaving, we turn to the scheme of the branded knot. This is a somewhat complicated bunch, but not so much so that you do not get on her per minute. We will tell how to knit with a scheme and explanation (Figure 5).

Let's start first:

  1. Fold twice the lace of the same color by forming a loop. Keep the connection between the big, medium and index finger.
  2. Free tip Walk into the resulting UCHO, then discovery around the loop. Bend downstairs and do the end of a thin rope in the second formed loop of the same color as the free sling.
  3. Not tightening, repeating the operation. There should be two turns, after which the thread should be tightened. Weaving with two threads - the branded knot is ready.

Figure 5. Step-by-step knitting scheme

The compound of cables in the number of two brahrshkotovy, it will be possible even in a person who has never appealed with sea weavings.

In the article, we looked at how to weave one of the most simple and reliable ligaments - Brahmschkot. Practical recommendations on viscosity you can see in the video.

How to knit the branded knot?

Very often, in everyday life, we face the need to connect the ends of rope or threads, but we use only a double knot or a bow for this. Such a compound cannot be called the most reliable, and the presentable too. In fact, there is a huge number of types of nodes: Brahmshkotovy, Shkotova, Direct, Counter and Many others. Most often they are used in mountaineering, but in everyday life the ability to tie beautiful nodes there is always a place.

Skill benefit

Today, almost every designer knows how to tie a branded knot, because its appearance allows you to beautifully consolidate various twine, ropes or cables used in interior decoration. Crying the curtains using such a compound can absolutely each, at the same time decorating its room with an unusual solution. A reliable connection of rope is useful and, if necessary, to tie the cargo, for example, on the roof of the machine or to feed it to height. The latter is especially true in construction.

In any case, learn how to knit beautiful and reliable knots from the rope will not be superfluous anyone. Such a skill is equally useful and for decorating the interior on their own, and, if necessary, firmly connect the ends of the cables or tie the cargo.

Varieties of nodes

A huge mass of different options for rope connections is divided into 3 main groups:

  • referring;
  • for connection;
  • Auxiliary.

The first most often found in mountaineering, if necessary, consolidate the equipment or the mountaineer itself at the height. They are loop and grabbing. Such compounds allow you to move the ropes with a small attenuation of them, are indispensable when moving at height.

Connecting nodes can bind ropes of one or different diameters. To ensure that the connection is reliable, a specific node is used for each case. Brahmshkotov is necessary just if necessary to link the cables of different diameters or textures.

It is very important for better consolidation of the connection to insure its auxiliary nodes.

Nodes for connecting identical cables

Most often among these are used direct node and counter. The first is the foundation for almost everyone else. According to his principle, the branded knot also fit. The connection is carried out by the location in parallel two endings of the rope. From one there is a loop, the end of the second rope is first passed into the loop, then it comes out of it from the same side and starts back into the loop, but on the other side and below. In fact, everything is simple, but the node is able to unleash himself, therefore, it is necessary to make auxiliary nodes on the edges obtained after connecting the cable.

For the oncoming node, it is necessary to make the usual curl of one end of the cable (as when tying a simple node, but without tightening). After that, the end of the second rope is passed into the loop and forms a similar simple node, but only in the opposite direction. After that, the connection is delayed. Such a node is suitable for binding ribbons or cables of different diameters. It can be used for rope bundles, ribbons.

Nodes for complex compounds

For a reliable connection of ropes of various diameters, aktric and branded nodes are often used. The first many is known and under the other name - weaving. The thing is that it was thus previously combined the ends of the threads when replacing the bobbins during the manufacture of fabrics, although the history of such a node begins with the sea fleet. Despite this, the node today is widely used for binding completely different rope thickness, it is perfectly held at a strong load. The Brahmshkotov node is a kind of cleaner. It differs only in the increased area of ​​contact with the rope, which respectively increases the strength of friction.

How to tie a weaving knot

For many, this instruction may seem even easier than for a direct node, you only need to remember the correct sequence of actions. First you need to take the end of one rope and fold the loop out of it.

After that, the connection is delayed, the ropes will block their own movement due to the force of friction. Interestingly, but the branded knot at the initial stage fit completely similarly. It is very important after tying the main compound to insure its auxiliary nodes from both ends of the cable. This is necessary because when jerking loads, the connection can quickly spread. The brahmshkotovy node and the squirrel are reliable only with stable voltage, in other cases have a slack. This is especially important in such compounds, since both ends are movable.

With a correctly performed sequence of actions when tying both working end of the rope should be located on one side. If they are on the opposite sides, this compound is unreliable and quickly encouraged, especially if there were no auxiliary nodes (even with moderate loads). Best of all in such a situation, the connection to completely remake.

How to make a branded knot

As already mentioned, the beginning of work on such a compound is completely identical to the previous node, since it is it (Skotovaya) underlies the complicated option.

  1. So, the working end of the second cable should once again circle around the turn of the first cable.
  2. After that, the second working end is passed under the root end of the rope and the second loop is obtained.
  3. It is important to make sure that both turns are located strictly under the root end of the rope and are not intertwined with each other.
  4. At the end, the node is delayed and checked to the slack.

When all the main work is done, the connection should also be insured by control nodes. Despite the fact that the area of ​​contact in the rope in this case is greater, the connection is still inclined to unleash during jerk loads.

It is very important when binding the rope by any of the options given in the article to monitor the correctness of action. In everyday life, for a reliable connection of two any ends of the rope, mounting hammock, awning or when installing a tent, a single or double branded knot will help. As each of the options fit. Described in detail above.

Another connection option

In the mountaineering for connecting two cables, the grapevine node is often found. It is used to connect the rope of the same double radius or ribbons to form loops, bookmarks or delay. Each optional has its own weaving features. In the first case, the rope is delayed very tightly, and in the second, the loops are left. It is not necessary to stop in detail on this compound, because it is used mainly only in mountaineering, and not in ordinary life.

Control compounds

So, how to tie a brahlichkotkot knot, now it is clear, but it should be understood with the need for additional control compounds.

Auxiliary compounds

Especially often in the mountaineering it is necessary to connect various adaptations to climb, which would have helped the mountaineer to conquer the vertex quickly, easily and safely.

Recently, such compounds are increasingly found in everyday life. Their main advantage is the reliability of the attachment, which for years has been verified in extreme conditions. As the most common node of this direction can be considered grasp.

Cracking

Initially, this compound was used as the main one during insurance in the mountaineering, but over time it was supplanted with more reliable and simple nodes. Today, such a type of weave rope is still used in the professional conquest of mountain peaks, but already as auxiliary.

In ordinary life, such a node can be used on a wet or icing rope, if necessary, quickly attach heavy items. You can form a node using a loop or one end of the rope. Work in this case will be only 1 cable that the connection will be knitted. For increased reliability, the node can be associated with 3 turns.

More options

In addition to the above-described auxiliary connection in professional mountaineering, such nodes are often used:

  • carbine, or bachman knot;
  • stirrup;
  • Loop Garda;
  • bayonet or reef.

Almost all of them are used for insurance or transportation of various goods.

Conclusion

How to establish a brahkotkotovy node, it is already clear, but first should be paid to other important points. For example, rope strength. So, you must first pay attention to the selected rope. It should be known that at the very point of connecting the connection, the strength of the rope falls approximately 25% -40%, so it is necessary to select the material for the formation of the node with a good safety margin. Also, not every connection is capable of equally tightly on each rope due to the difference in the texture of the connecting materials.

For reliable fastening of various goods, special attention should be paid to the quality and strength of the selected ropes. When using the same nodes in the form of decoration elements, it remains an important aspect that the aesthetics remains, and not the connection strength. That is why ordinary dense ribbons, beautiful cables and multi-colored ropes are often used to mating beautiful connections in design, but they are usually very slippery.

In general, attention should be paid to the choice of materials in accordance with the appointment of compounds.

Knot Brahmshkotovaya. Step-by-step instruction. Useful advice

Everyone knows that the strongest rope knots are invented by sailors on a sailing fleet. Since then, much time has passed, but marine nodes continue in many areas of life. After all, these are the strongest and reliable connections of rope.

Not only sailors are engaged in the study of marine units. Often they use tourists, fishermen, climbers and climbers. From the ability to quickly and correctly tie a knot on the rope sometimes the life and human health. It is necessary to approach learning very seriously, the skill is required to fully automatism, then at the right moment, no matter how extreme it is, the knot will be tied up quickly, skillfully and reliably.

How to learn nodes tying?

There are two ways to train marine nodes tying: algorithmic and visual. During the first method, the student remembers the sequence and step-by-step movement of the rope. This usually happens in classes with a teacher in naval institutions or tourism sections. The teacher shows the sequence of tying, and the student repeats behind it.

The second method is based on visual memory, when performing and memorizing methods of tying on schemes, pictures, training stands. The student sees the final result and tries that his node looks the same as in the scheme.

Reliable and strong

In a sailing fleet one of the most reliable and strong, the branded knot is considered (otherwise, Brah-Shkotova). It is named by the name of the tackle of the brah-shkot, which stretch the angles of the bottom of the direct sail when installing the bramssels. It is also called a double squirrel. Just the squirrel node is not so reliable. They are binding only single skots of sails from below, and the branded knot is of much wider use. This is the knitting of Brahmshkotov, Brother-Shkotov, Bram Fals, Barm-Fals, Brahma Gite.

The reliability of the node is the technique of its tying. The loop or the Krengeels droop the rope with the running end, and they pass under the root end. This type of node equally retains the cables of the same and different thickness. They can bind the ropes of natural and synthetic, thin and thick. Because of its convenience and reliability, it is widely used in mountaineering, because in the absence of tension of the cable, it is not immediately unleashed, and this is important for safety at high altitude.

Step-by-step instruction

Knot Brah-Shkotova learn to knit simple, you need to carefully follow the instructions. First of all, when learning, take ropes of different color, it will be easier to distinguish the running end from the main one. The first rope is folded in the form of a drop. The end end is kept in the other hand, directing it into the resulting loop.

The branded knot knit on the scheme, the rubbing end in the middle of the loop, bypass the main rope, wrap the book. From above, another loop was formed, where you need to make the end of the dark rope, acting in the direction of the specified arrow.

If at the moment the ropes are at the moment, then it turns out a squirrel node, but we need a double and stronger branded knot. How to tie it is shown at the next learning photo. By arrow, you need to go to the loop running end again.

Only after this process requires firmly tighten the ends. The resulting node is Brah-Shkoty. It is also called a double squirrel. For more security, especially in mountain climbing and climbing, also tie insurance nodes.

When tying a rope from the tent to a peg or wood, they are not very conceived about reliability, since there is no threat to life, but an athlete hanging over the abyss at a huge height, about the safety of his life thinks first. The node should not crawl with variable loads, unleashed spontaneously and tightly delay. It is also an important point is the speed and ease of use, and here it is impossible to show myself exactly the brand-shkoty knot.

The need for subjects

Any use of nodes on a rope reduces its strength. Tight tension on the gap with force exposure, the fibers when twisting the node reduces the reliability of the structure. Climbers often conquer mountains covered with snow and ice, and wet and freezing rope experiencing ice crystals on fiber.

Other natural factors also affect the quality of ropes. The sun dried on a bright or dirt-soaked rope reduces the strength of the nodes by 30%. Wet in the rain - loses up to 10% strength. So even knowing how to knit the branded knot correctly and quickly, it is better to progress and make extra protection, especially if your rope is tested many times for strength.

Learn to knit nodes diligently, and your life will be in full security!

Everyone knows that the strongest rope knots are invented by sailors on a sailing fleet. Since then, much time has passed, but marine nodes continue in many areas of life. After all, these are the strongest and reliable connections of rope.

Knot Brahmshkotovaya

Not only sailors are engaged in the study of marine units. Often they use tourists, fishermen, climbers and climbers. From the ability to quickly and correctly tie a knot on the rope sometimes the life and human health. It is necessary to approach learning very seriously, the skill is required to fully automatism, then at the right moment, no matter how extreme it is, the knot will be tied up quickly, skillfully and reliably.

How to learn nodes tying?

There are two ways to train marine nodes tying: algorithmic and visual. During the first method, the student remembers the sequence and step-by-step movement of the rope. This usually happens in classes with a teacher in naval institutions or tourism sections. The teacher shows the sequence of tying, and the student repeats behind it.

Brahmshkotovy node how to knit

The second method is based on visual memory, when performing and memorizing methods of tying on schemes, pictures, training stands. The student sees the final result and tries that his node looks the same as in the scheme.

Reliable and strong

In a sailing fleet one of the most reliable and strong, the branded knot is considered (otherwise, Brah-Shkotova). It is named by the name of the tackle of the brah-shkot, which stretch the angles of the bottom of the direct sail when installing the bramssels. It is also called a double squirrel. Just the squirrel node is not so reliable. They are binding only single skots of sails from below, and the branded knot is of much wider use. This is the knitting of Brahmshkotov, Brother-Shkotov, Bram Fals, Barm-Fals, Brahma Gite.

Knot Brahmshkotovaya

The reliability of the node is the technique of its tying. The loop or the Krengeels droop the rope with the running end, and they pass under the root end. This type of node equally retains the cables of the same and different thickness. They can bind the ropes of natural and synthetic, thin and thick. Because of its convenience and reliability, it is widely used in mountaineering, because in the absence of tension of the cable, it is not immediately unleashed, and this is important for safety at high altitude.

Step-by-step instruction

Knot Brah-Shkotova learn to knit simple, you need to carefully follow the instructions. First of all, when learning, take ropes of different color, it will be easier to distinguish the running end from the main one. The first rope is folded in the form of a drop. The end end is kept in the other hand, directing it into the resulting loop.

Brahmshkotovy node scheme

The branded knot knit on the scheme, the rubbing end in the middle of the loop, bypass the main rope, wrap the book. From above, another loop was formed, where you need to make the end of the dark rope, acting in the direction of the specified arrow.

how to tie a branded knot

If at the moment the ropes are at the moment, then it turns out a squirrel node, but we need a double and stronger branded knot. How to tie it is shown at the next learning photo. By arrow, you need to go to the loop running end again.

Knot Brahmshkotovaya

Only after this process requires firmly tighten the ends. The resulting node is Brah-Shkoty. It is also called a double squirrel. For more security, especially in mountain climbing and climbing, also tie insurance nodes.

Knot Brahmshkotovaya

When tying a rope from the tent to a peg or wood, they are not very conceived about reliability, since there is no threat to life, but an athlete hanging over the abyss at a huge height, about the safety of his life thinks first. The node should not crawl with variable loads, unleashed spontaneously and tightly delay. It is also an important point is the speed and ease of use, and here it is impossible to show myself exactly the brand-shkoty knot.

The need for subjects

Any use of nodes on a rope reduces its strength. Tight tension on the gap with force exposure, the fibers when twisting the node reduces the reliability of the structure. Climbers often conquer mountains covered with snow and ice, and wet and freezing rope experiencing ice crystals on fiber.

Other natural factors also affect the quality of ropes. The sun dried on a bright or dirt-soaked rope reduces the strength of the nodes by 30%. Wet in the rain - loses up to 10% strength. So even knowing how to knit the branded knot correctly and quickly, it is better to progress and make extra protection, especially if your rope is tested many times for strength.

Learn to knit nodes diligently, and your life will be in full security!

The branded knot was used to tie ropes, cables and capro thick threads with rigging work through a pre-made loop. The name of the node went from the name of the tackle of brams-shkot. It was for her attachment that he was used fishermen.

Brahmshkotovy Knot

Scheme Brahmshkotovy Vyatki

Today the node is applied in mountaineering, and it is intended in this area for the following purposes:

  • insurance systems, namely during the change of a thin rope on thick or for a larger diameter cable;
  • binding of cables and ropes of various sections.

How to tie Babi node, read the link.

Application of branded node

Its value is difficult to overestimate. Apply a node in tourism for the tying of marine flags, knitting networks or to suspect the stirrup horse.

Also his appointment in everyday life - tie a tie and knit bracelets.

In the tourist campaigns, this tourist node is no less popular than straight, Bulin (Condiscience), grapevine, flat, conductor, academic or counter eight.

It differs from the simple shkotov node by the fact that, due to another turn around the main rope or cable, it perfectly transfers great overloads.

The photo shows this node.

Node on the rope

Nodes

How to knit the counter-eight knot, you can learn from the link.

How to Knit Brahmshkotov

A step-by-step knitting node scheme is presented in the pictures and photos.

Scheme viscous

To tie a node, you must take the rope of the larger cross section and, bending it, make a loop. Other rope or smaller cable We will start a loop from the rope of a larger diameter. First step
We supply the end of the rope with a smaller diameter in a circle from the loop. Second Step
Fully overlooking the rope or cable of a larger cross section, wrap the rope from the bottom of the loop. You need to complete another additional turnover. Third Step
Pull the end and knit a double fixing knot. Fourth Step

Brahmshkotovy knot is ready. The associated nodule will serve for a long time.

How can you make sure to make such a node simply.

How to knit academic node, see the link.

Video

The video tells how to knit this node correctly. It is very simple, and therefore it is easy to learn to knit. A phased explanation, how to tie a node will help grab everything very quickly.

By reference, you can find out how the conductor node is tied.

Being a close relative of the Shkotovskoye node, the branded knot is one of the most reliable rope nodes. And all due to the fact that with its help you can easily tie two ropes and be sure that they will not weaken. Let's find out in more detail how to knit the branded knot.

It is also called a double squirrel node (or Double Sheet Band in English).

How to tie a branded knot?

History of the node

Like a squirrel node, it appeared in about the 19th century on board the ship, since it was most often used to bind to sails. The first mention of him appeared in the 1860s. Thanks to this application, its name (from the title of tackle used on ships and sailboats - Bram-Shkot). Also initially, the node was used by Garpuner on the whaling vessel to tie harpoon.

What does the knot look like?

Brahmshkotovy node is a safer change in a skylight node. The main difference is that the loop is missing the end of the rope not one, but twice, and then twice enter it under the root end of the rope.

With the correct string of the node, two tails (end) lie on one side of the node and are more reliable than if they were on opposite sides.

Where does the node apply?

Mainly the node is used to effectively connect two ropes that have a labeled difference in diameters or stiffness. Its main purpose is to create additional strength when binding two ropes.

As mentioned above, this node was often applied and applied in our time on ships and sailboats to secure cables and ropes, as well as in rigging work. To be more accurate, the branded node is involved in the binding and combination of sails, cables.

In addition, its application can be found in mountaineering, for example, to create additional insurance, when it is necessary to replace a thin rope to thicker and durable, as well as to bind two ropes.

We cannot say with confidence that it is useful in fishing or hunting directly, but why not remember him under any other conditions. This node in any case is also tourist and useful to you in the situation of survival in the forest or on the reservoir.

How to tie a branded knot?

Advantages of the node

Comparing the brahkotkotovny knot with the Shkotov, you can see quite serious differences and the best advantages. Adding additional turn around the shoga prevents the rope offset. For maximum strength, the free ends of the rope should be upstairs on the same side of the brahlic node.

An ordinary shkoty node in the absence of sufficient load can slip and loosen, but the brahmshkotovy node will be firmly held thanks to an additional loop.

How to knit the branded knot?

After studying theoretical information, proceed to the scheme of the branded node. In general, there is nothing difficult here if you have mastered the knitting knot. So, army with two ropes and follow the gradent:

1. Make a loop from a larger diameter rope.

How to tie a branded knot?

2. Tighten the second rope (smaller diameter) into the first rope loop.

How to tie a branded knot?

3. Move the end around and under the other rope.

How to tie a branded knot?

4. Turn the work end to itself so that both short end are on one side of the node.

How to tie a branded knot?

5. Resort the working end around and under the other rope, holding it to the right of the initial passage.

How to tie a branded knot?

6. Tighten the node firmly.

How to tie a branded knot?

After thorough events, now finally, you can use it at any time to associate two ropes of different diameters. Having a lot of useful properties, the branded knot is one of the most optimal and reliable, as it is described in the book of Ashley nodes.

Even more interesting about Fishing and hunting on the site velesovik.ru and in our group In contact with .

We invite you to go to the amazing world of fishing and hunting at any time and in any weather.

Добавить комментарий