Fireplace from cardboard with their own hands - 125 photos and instructions for manufacture

How to pick up Cardboard

Quality and view will depend on the material and type of cardboard boxes. If you take the packaging from the TV, "Falekintin" will be narrow without much deepening in the place where burning firewood are located. Therefore, wide boxes are most often used, at least 50 centimeters deep into. It is also desirable to use the most durable cardboard, in this case, you can make a stand from a tree from above.

Cardboard fireplace do it yourself

Choose durable cardboard

If there is a desire to make a more complex design, it is recommended to prepare 2 more boxes of different sizes. This will expand the possibilities for creative idea. It is also worth taking care that drawings easily applied on paper. They should be well visible, since in case of an error, you will have to look for a new material.

Cardboard fireplace do it yourself

Complex design of several boxes

Frequently used 3 species "Faleximinal", namely:

  1. Christmas with New Year's decorations.
  2. Corner focus.
  3. Standard wall.

For each of them it is necessary to select a certain amount of materials and types of cardboard boxes. To make the design more stable and reliable, can be placed inside the wooden frame. It will be relevant in the family in which young children grow.

Cardboard fireplace do it yourself

Christmas featured

Materials

For the manufacture of the fireplace, you will need such materials from the boxes:

  • Naturally, one or more large boxes - depending on which fireplace you want to get in the end;
  • Wallpaper (one roll is enough) or white paper;
  • Stationery glue either PVA glue;
  • Three types of scotch - ordinary, greasy and bilateral;
  • Painting tassels, sponges, rags;
  • Stationery knife, scissors, ruler, pencil, as well as tape measure and construction level;
  • Sheet of plasterboard or plywood for creating a fireplace shelf;
  • Depending on the chosen type of decoration, you will also need:

Cardboard fireplace do it yourself

8 photos

  1. Roll of wallpapers with a "brick" pattern or red cardboard - if you want to re-establish your fireplace "under the brick";
  2. Roll of self-adhesive film with a pattern imitating natural stone, marble or malachite;
  3. Pancake with white paint, ceiling plinth and stucco decorations made of foam (columns, capitals, sockets, moldings, etc.) - to create a more classic, elegant decor;
  4. "Liquid" volume wallpaper - to achieve the effect of the effect of embossed marble crumbs on the surface of the fireplace;
  5. Acrylic paint bronze, silver or gold color - for a special decoration of the elements of the fireplace decor.

Cardboard fireplace do it yourself

Preparatory stage

Before proceeding with work, you need to stock all materials and tools.

What will be needed to create a false fireplace:

  1. Big box of corrugated cardboard. Any packaging is suitable from large household appliances: TV, refrigerator.
  2. Polymeric glue (for example, Dragon). We will use it for sticking decorative elements from polystyrene foam.
  3. PVA glue will be needed for attaching pieces of thin paper to cardboard and corners.
  4. Scotch - wide, greasy. With it, it will be easy to salary corners.
  5. White water-based paint, which is useful for the primer of the surface of the Christmas fireplace and staining is already the finished design.
  6. Varnish - transparent, water.
  7. Acrylic paint of different colors for decorative design of various elements.
  8. Liquid wallpaper (optional). Some craftsmen successfully decorate the future focus around the perimeter using this type of coating. In this case, imitation of any finishing material, such as marble crumbs, can be achieved.
  9. Decorative elements, such as moldings, corners, stucco, columns and others.

Instruments:

  • brushes of different sizes;
  • Stationery cutter;
  • sponge;
  • Long line;
  • roulette;
  • Scotch;
  • simple pencil;
  • Dry rags.

Everything you need to work can be bought in stationery and building stores.

Making a solid foundation

The lower part of the homemade fireplace, which serves as a stand, should be durable and tough, since in addition to the weight of the structure, it must withstand all items installed on the center for a long period.

You can strengthen the lower border with the help of additional inserts, they will be fixed inside the cardboard frame. Such "ribs" can be placed along the entire length through certain intervals or simply stick chaotic throughout the bottom.

Cardboard fireplace do it yourself

Strengthen all parts for design reliability

Strengthening inserts must have the same height, otherwise the weight will be distributed unevenly, which will affect their holding ability.

The lower part in the form of a stand should always be longer and wider than the main design of the focus, by about 100-120 mm. To make a support, you can use the 2 most simple and efficient ways:

  • Cut from cardboard two identical sheets (bottom and upper part). One of them is pasted "edges" to support the fireplace. Here you can use bilateral tape or glue;
  • Find a flat box with sides and set inside strengthening inserts.

Cardboard fireplace do it yourself

Easy way to make your own hands

How to decorate a stand?

Like any other element, the stand needs decoration. The simplest thing you can do is pick up the original side panels for it, plane the cardboard with self-tapping with the pattern, wilt into the wallpaper or paint. But there are other, more original ideas.

Cardboard fireplace do it yourself

Self-stick with a pattern in the design of the fireplace

If the homemade fireplace was made in honor of the Christmas holidays, the foundation can be painted in red or white and tighten the rain with a garland.

Cardboard fireplace do it yourself

Step by step we create imitation

For standard, people often use wide plinths with beautiful patterns. They can be bought in any construction store and install in the lower and top of the focus, it always looks very beautiful and holistic.

Cardboard fireplace do it yourself

Elegant fireplace with a wide plinth

A homemade fireplace of any kind can make every person who has no experience in construction. Also, such a focus will allow you to make an apartment or a house more comfortable, and in New Year's holidays will create the necessary magic atmosphere. It is worth noting that Christmas or other photographs next to the fireplace are always experiencing spectacular and remembered for life.

https://youtube.com/watch?v=a0huer poshzi

Views

Surprisingly, not only a homely false fireplace can be made from cardboard boxes, which can be performed exclusively decorative function, but also to build a portal for electrocamine! Of course, such a portal eliminates the installation of a gas burner, or biocamine, since there is an open flame there and fire can happen. It is impossible to establish a heat exchange fireplace with a water boiler and a casing - due to the bulkness of this design and, of course, the danger of inflammation of cardboard from overheating. Also cannot be installed electrograms with an open firebox and the built-in heating function - for the same reason. In the design of cardboard boxes, you can insert a electric fireplace with a closed fireplace and imitation of the flame (on the LCD screen or using the backlight).

According to style directions, the following types of fireplaces are distinguished from boxes:

  • In modern style. This style of design of the fireplace portal involves the diversity of textures and colors, a combination of modern forms and ancient decor elements (stucco, sockets, etc.). Such a fireplace will fit well in almost any interior;
  • In the style of high-tech. It would seem that the style of High-Tech involves some futurism, the use of such super-modern materials, as steel, plexiglass - what are cardboard boxes? However, even of them you can make a fireplace in such a style - it is enough to make it an interesting geometric shape and paint in black or steel color, and insert a mirror in the furnace. Alternatively, you can put the glass on the fireplace shelf;
  • In classic style. As you know, the classic is always in fashion. Strict lines, minimum of additional decorations - such a fireplace can be put absolutely in any apartment;
  • Country style. Favorite many "rustic" style. It is distinguished by the fact that such fireplaces are made of bricks and natural stones. In order to give a fireplace from the boxes, it is enough to glue it with a self-adhesive film or wallpaper with a print under the brick or a stone. In the firework be sure to put firewood.

Cardboard fireplace do it yourself

7 photos

How to make confused

This species common among people living in apartments. He does not take a lot of space and fits well in any interior. To make a fired hearth from cardboard boxes, the following tools and materials will be required:

  • stationery knife;
  • sponge, brush or other tool for accurate painting;
  • Reliable glue (recommended "moment" or glue for plastic products).
  • Construction Scotch;
  • Putty or water-level white paint;
  • Cardboard boxes (if possible, large packaging from under the refrigerator, widescreen TV or washing machine) is more suitable for the fireplace).
  • paper;
  • pencil or thin marker for drawings;
  • line;
  • Polyfoam for creating a stand and other decorative elements.

When creating a drawing on paper, it is desirable to designate not only the main construction products, and the decorations.

Sometimes the owner has no big box pairs, but there are many medium. In this case, they can be accurately glued and do almost the same.

When the sketch is ready and applied to paper, you can begin to transfer it to cardboard boxes. For convenience, basic and auxiliary lines are applied with different colors of handles or markers.

Cardboard fireplace do it yourself

Think over each stage so that you miss anything

Next, make a flue hole. To do this, take a knife and cut it in the center of the box.

It is very important not to forget to leave a part of the front wall above and on the sides to stick it to the back and close the empty space

Finishing work

After the work on the creation of the main frame is complete, you can begin trim. Here you can use anything, depending on the idea. Usually it is glued with original wallpaper or packed paper. If there are people in the family who are well drawn, you can apply beautiful patterns or draw thematic drawings in honor of any holiday.

Cardboard fireplace do it yourself

Use favorite material for finishing the fireplace

If you want to make a standard fireplace, you can use foam bricks, as well as in the case of a Christmas hearth. Remember that artificial stones can be pasted not only on the outside, but also inside, where the flame is usually burning.

To decorate the front part, in the store you can purchase special figures in the form of flowers, angels and other things. They are made from lightweight material, so never fall apart, even when using conventional PVA glue.

Cardboard fireplace do it yourself

Decorate the fireplace of various decor from the store

To install the shelf from above, you must first glue the plinth in its edges. In this case, it is advisable to use as original products as possible. As a shelf, you can apply a wooden sheet of plywood or other material, the main thing is that it is not too heavy. If the frame is not additionally strengthened, there is a risk of destruction of the design.

Measurements of the fireplace shelf must be carried out only after the plinth is installed, if cutting it under the size of the fireplace itself, it may not come up.

Painting

Almost 90% of people who make a fireplace for an apartment from cardboard with their own hands, paint it with white water-emulsion paint. But if you approach the question creative, you can betray a hearth vintage and apply an ordinary putty for drywall (after applying it is necessary to dry the coating with a construction hairdryer).

If it's still decided to simply paint a homemade fireplace, you can use a simple brush, and the sponge is necessary to cover the paint of the most hard-to-reach places.

Cardboard fireplace do it yourself

The easiest option is to just paint in white

Warmed almost ready, it remains only to decorate it. Inside, you can set a photo of the present flame, and in the furnace add real or homemade firewood. Sometimes people install candlesticks on the shelf, it looks very impressive and gives the feeling of the antiquity.

Cardboard fireplace do it yourself

Decorate with all festive attributes

How to do in honor of the Christmas holidays

To make a Christmas hearth, you will need only 3 cardboard boxes, one of them should be big and 2 others smaller, but the same. The first is installed on the center, while others at the edges. Next, items glued with scotch or reliable glue.

Cardboard fireplace do it yourself

Creating a frame for the future fireplace

If the house did not find the boxes of the same in height, they cut. At the same time, the upper part should not have failures.

The room where the fireplace will be installed, it is desirable to use the same where a fir will be, it will create more comfort and a festive atmosphere.

The first thing to be done is to remove the front of the wall at a large box, which is in the middle, there will be a flue hole. The fireplace can be put on a pre-prepared border, so it will look much more effectively.

Cardboard fireplace do it yourself

Border for the fireplace

If there is a desire to make artificial bricks, you can use a thin foam. It needs to be placed and cut rectangular shapes, the size of a little less than standard bricks (if the value allows you to use the original stone sizes).

Cardboard fireplace do it yourself

Decorative brick do it yourself

Now you can proceed to gluing foam. Bricks need to be placed in a chess order so that the masonry is as close as possible to the present. After the work done, the glue must be frozen, only after that the work can be continued.

Cardboard fireplace do it yourself

Polyfoam gluing to the fireplace

Now you can start painting. It is advisable to primitive in several layers so that all parts have the same color. Bordur usually paint in yellow, and bricks in red or in golden. If the owner wants to make a hearth not only for New Year holidays, you can buy brown paint.

How to decorate the New Year's fireplace?

To decorate the Christmas hearth, use various toys and natural materials, for example:

  • Fir branches.
  • Bumps.
  • Balls.
  • Rain.
  • Christmas socks for gifts.
  • Fruits.
  • Candy.
  • Bells.
  • Figures of Santa Claus and Snow Maiden.
  • Paper snowflakes.
  • Garlands with backlit.

Cardboard fireplace do it yourself

Toys and decorations for christmas focus

You need to apply suitable colors. It is recommended to use green, red, golden, blue or white or white decorations, as well as their shades.

How to make a fireplace from cardboard: tips and recommendations

To hold a cozy evening, basking by the fireplace, can not afford not many. But make a small falsefin, with your own hands, it will be possible, it will give the opportunity to realize the dream of a homely focus. Make a product from cardboard can even an ordinary person without skills, you should only take into account the recommendations for the manufacture of this product.

Features

In private households, the fireplace is often installed. Such a product is usually located in the central part of the house. Such an original model will decorate any room, the installation will contribute to the creation of a comfortable atmosphere. It is especially interesting to look for products decorated with bright garlands, toys and candles for the New Year or on Christmas holidays. The fireplace in the house in many countries is considered the subject that symbolizes happiness in the family.

In modern apartments it is difficult to establish a real fireplace , Therefore, for the incarnation of a dream, you can make a product from cardboard yourself, moreover, for its beauty, Falekintim will not give way to the present object. You can build and deliver the product from cardboard in any, even the smallest room.

The decorative fireplace will certainly make the attention of visitors to himself, so put it in the most convenient place for this place for better viewing. The product will look very organic, especially if you set it between the windows.

Often, decorative products are installed in shared rooms, such as living rooms, dining rooms; No less organically, they will look fireplaces in the bedroom. When they are manufactured, it is worth understanding that this product should approach the overall style of the room. Such structures are unlikely to be appropriate in rooms performed in high-tech or modern styles.

Fireplace, made with your own hands, must complement the design already created , Promote the improvement of the selected style. In the process of manufacture and decoration, you can create unique designs and come up with unusual attributes.

Dilute the fire in the decorative fireplace is hardly possible, its task is only a decorative function. To make the flame more realistic, it is possible to put candles instead of the conventional fire in the fire or connect the electric garlands. Falekamins made from cardboard are practically no different from the real products made of bricks.

Advantages of cardboard falsecamines:

  • products have a very original and beautiful appearance;
  • able to give the room of sophistication;
  • They are placed in any convenient place for this;
  • The construction of such designs can give the opportunity to feel like an experienced designer;
  • To build such a fireplace, large material spending is not required;
  • The ability to quickly disassemble such a product if necessary.

The disadvantages of these structures include:

  • Insecurity of the structure. For the manufacture of products take soft materials such as cardboard, paper, so the product can be deformed over time.
  • In fallacamines it is impossible to drain the real fire, so such a product will have only a decorative function and will not create heat in the room.
  • For the construction of the design, you should spend several days on its manufacture and decoration.

Style and Design

Before starting the construction of a design from a cardboard, it is worth conducting a preparatory work. You should decide on the installation site. For this, the wall without furniture or an angle of the room is suitable. To determine the size of the structure, it is worth calculating it right at the installation site. Layout or milying for the future building will allow you to decide on the size of the product and select the decor for it.

Fireplace, made with your own hands, can be done in any size By choosing the optimal length and width for this, while the style of the room should be taken into account. Falekmin must harmoniously fit into the interior of any room. It should not be allowed to make the product clutter most of the room or did not harmonize with furniture. In addition, the size of the product should be taken into account and not to do it too small if the room is cumbersome furniture. The fireplace should supplement the common picture and make a room more interesting, and not drowning it or make a dissonance.

Choosing a finish for the product It is important to take into account that it follows it most carefully, otherwise there may be flaws that will reduce the effect of the work done. So that in the end it turned out an interesting and original product, you can learn unusual and interesting ideas from experienced designers or make a fireplace based on your preferences.

Required tools and components

In the manufacture of a design from a cardboard, you need to prepare work tools and materials that may be needed in the process.

Well, if at home there is a large cardboard box from under office equipment or furniture. It is enough for the manufacture of a conceived model. If there is no big box, then you can take a smaller shoe boxes. If at home does not store unnecessary things, then the boxes can just buy. An interesting fireplace model can be made from postcases for parcels.

Besides boxes, you should prepare:

  • Stationery knife;
  • scissors;
  • Glue type PVA and any mounting glue for working with decorative elements;
  • Malyary, bilateral and ordinary tape;
  • Water-emulsion paint.

In addition to the main tools, you will also need additional, which can be used both in the process and during the decoration of the product:

  • roulette;
  • line;
  • pencil;
  • paper napkins;
  • foam tiles;
  • Different types of paints;
  • varnish;
  • Simple or decorative wallpaper.

During the work, the sponges and dry rags will be alike. For the decor you can purchase various details, such as moldings, columns, stucco products. All these materials and decorative elements can be bought in a construction and stationery store.

So that the fireplace looks like a real, for the construction of fire imitation, you need to decompose firewood, putting a device with flashing lights. Thanks to this illumination, the impression that the real fireplace is lit in the room.

In addition, you can embed a column connected to any device in a decorative design. Such an appliance will create sounds that imitate the crackling of the combustible firewood. With the light of the light connected to the fireplace, the source of sound and lighting will create an unusually cozy and fabulous atmosphere. It will be very interesting to look a lattice installed on the front of the product.

The acquisition of parts and materials depends on which model of the design is intended. Decorative elements can be purchased in the store or independently make decorative parts for falhablemin.

How to make your own hands?

After the materials and tools decided, the plan with detailed measurements should be drawn. Step-by-step instructions will thus simplify the process of making a fireplace fireplace.

Making a cardboard design - the case is simple, if approaching work responsibly. Each master has its own secrets for the manufacture of the product, so it is necessary to familiarize yourself with the workflow, looking at several options on the video or visiting the master class, where it will plunge into the working atmosphere in more detail.

Even the simplest design of the design should consist of the following steps:

  • It is necessary to select the type of product, decide on the form and place for it;
  • Choose materials for the manufacture of frame and subsequent finish;
  • Prepare the necessary tools and materials;
  • place details on cardboard;
  • cut all the details, glue them and install the design;
  • make outdoor product finish

Consider the option where a large cardboard box take for the manufacture of the basis. From such a box, it turns out a product of a rectangular shape. When choosing a size, specialists are recommended to navigate the height of the product about 90 cm with a width of 80-90 cm. The sizes of the fireplace may be different, it depends on the preferences of the manufacturer's wizard. In addition, it is often possible to see the models much higher, wider and deeper than standard sizes, and some of them can be equipped with decorative chimneys and stands and shelves.

In the manufacture of the product first we do the central part, then begin to form columns. The main thing is to measure and bend the items in the right places. In order for the columns to be smooth, you can take a ruler or other durable object, and pressing it into cardboard, bend it. After the preparation of parts, they are placed and painted. To glue the items, use greater tape, with it, the parts are sampled on both sides. In order to make the design more durable, it is recommended to put an additional partition on the walls.

At this stage, the bulk of the work is completed. Next, work on painting the product and reorganize the fireplace. Since the tape was used to lineting the cardboard, it should be hidden so that its traces were not visible. To do this, you can take a large sheet of white paper and puncture them all the surface or apply the primer to the model, and only after the priming paint the product.

After drying, the paints begin to finish the fireplace. To such work, you can approach creatively and make items for registration from different materials. You can simply leave the surface with wallpaper imitating brickwork, or make bricks with your own hands from cardboard, foam or other materials.

If cardboard is selected for imitation brick, it should be painted with white or colored water-level paint. After drying, to give the brickwork of the texture on the walls of the finished product, the most ordinary paper napkins are glued, which are then smeared with PVA glue. After drying the surface, the impression will be created that real bricks were used to finish the fireplace.

Suitable for product design and self-adhesive paper from which forms are cut in the form of bricks and lay them on the surface by a specific figure.

To simulate brickwork, you can use foam from which the parts will be cut out, which will serve as bricks to decorate the fireplace. Fontoam figures are lined with PVE glue to the fireplace surface, then the places are shuffled, where there are defects, after that they are applied to the water-mounted paint. When designing, the product is often used moldings and other decorative elements, unplug the corners.

Product assembly:

  • Having in the hands of the drawing, you can collect all the details. The design of the decorative fireplace from the cardboard consists of its base and portal.
  • For the base, they choose a rectangular shape of a product that glued with scotch. Cardboard is sealing, for this glove several pieces together. Now the design will not be fed.
  • The basis of the structure should be more fireplace thickness by 7 cm, and its length is 10 cm must be greater than the width.
  • For the portal and front part it is better to take a solid cardboard sheet. Inside the sheet cut the middle, which will be furnace. With the help of the tape to the back wall, the side walls are fixed.
  • Details should be connected to each other.
  • After all the parts of the fireplace glued together with each other, it's time for decor. The whole design should be covered with water-level paint white. Carefully scratch the seams and joints.
  • Optionally, you can leave a white fireplace or make a brick masonry imitation.
  • After drying, the entire design is covered with colorless varnish. Lacquered surfaces will be less polluted. Such products are easier to clean, they are not afraid of moisture, besides, they look more effectively than without a varnish coating.
  • The finished product is installed on its permanent place and decorate with candles, tinsel, decorative products.

If at home did not find a big box, but there are boxes from under shoes, you can use them. It is better to choose a few pieces with the same size. To work, it is necessary to take a skot of the lower part of the box and connect several identical elements together

Views

Decorative fireplaces for the premises often have:

  • Near the wall. Wailed structures are placed near the wall, the facade of the product will act forward at some distance.
  • Corner option. The product is placed in the corner of the room.
  • Built-in design. Such a product is mounted directly into the wall.
  • Island. Such falsemine put in the center of the room.

Each author of his product can perform it from various materials, various shapes and in any style. The main thing is that the product is combined with the room atmosphere, harmonized with the selected interior. Very nice will look at the product in the classic or English room. For premises decorated in the Art Deco style, models with curls and original patterns are suitable. If the room is decorated in a rustic style, it is not bad to make a fireplace with a rectangular furnace or in the form of an arch. It is important to make a fireplace that will complement the overall style of the room and perfectly fit into the room design.

If there are children in the house, you should take them into assistants. Schoolchildren can entrust the construction of the simplest model of Falexima. The kids will simply be delighted and will gladly build a toy decorative fireplace.

For the manufacture of a toy fireplace, they will need the same materials and tools, but the size of the product is worth making it small to facilitate the work process. Drawing up a plan and drawing, preparation of material and cutting parts will be under the power of senior schoolchildren. Little children can help while decorating the model, catching glue or cutting out bricks for the fireplace.

You can call the least complex option where the fireplace is performed in the form of the letter "P". This design can be gradually complemented by various decorative elements.

Material

When choosing a material to simulate this fireplace, you can select not only cardboard. You can make a product from plywood, foam tile, drywall. But the cardboard fireplace makes the easiest way, but it looks after the design is very beautiful. The main thing in working with the cardboard is to do everything right and scrupulously, otherwise instead of a beautiful product you can get a cleaning cardboard house. In order for the material to become more rigid, the supplementary layer of cardboard is put on the carrier parties.

To glue the surface, it is worth choosing a construction tape or paper paper for windows. You can take the usual tape, but it is suitable if the surface is placed with wallpaper. When painting the product on ordinary tape paint may not lie with a uniform layer.

During the assembly of the design, you can use corners - with their help you can make the corners of the product much smaller. You can after assembly and not pull them out, they will not be visible, but such a product will become more durable.

Since the product is collected from the details, the internal parts should be processed to the assembly process. To do this, they are laid out on the floor, paint or salable. This is especially true, since it is much more complicated to get to it in folded. If a hole is chosen small for it, then it will be frozen it is much easier to assemble the product.

But the external sides of the design should be issued in the ready-made form. In addition, if the product painting is planned, the surface should be preloaded, so you can hide traces from the tape.

Dimensions

To determine what size is needed for the fireplace, it is worth considering the place in advance where it will be and determine how well this model will fit into the room. Also worth seeing what materials and boxes are in stock. If there is a large box, you can build one type of construction, and having several small shoe boxes, the design can be completely different.

Fire drawing made of one large box

Many prefer the corner models. Such products occupy a little space. Corner fireplaces are more suitable for small rooms, this product is not bad for a bedroom or children's room.

Drawing of the corner false fireplace

More often decorative products are placed in general use rooms so that everyone has the opportunity to spend their free time. The fireplace, decorated with New Year's attributes, immediately add the atmosphere of the holiday to the room. If you have to put a Christmas tree nearby and decompose gifts, such a room with a decorative fireplace will become the most beautiful and cozy place for a while in a circle of family, friends and loved ones.

The dimensions of decorative fireplaces must correspond to the size of the room. For small rooms, you can choose the design of the standard size, and for a large spacious room it is worth building the fireplace with dimensions from 1.5 to 2 meters.

Colors

Choosing a color for the decorative product, it is worth paying attention to products of white, as well as models, in the design of which the colors of natural materials under the brick, stone, or choose the color of the product at its discretion.

Since the fireplace must organize in the design of the room and harmonize with furniture, the color of the product should fit into the total color palette of the room. The border for it can be painted in dark cherry tones, and for painting bricks it is worth using red or golden colors.

Often for finishing the walls of the fireplace choose thematic wallpapers. Often for such products use a canvas with a pattern in the form of a brick wall. For the New Year holidays, you can choose a wallpaper with a pattern of deer and New Year's attributes. Although the fireplaces with deer and Santa Moroza in the warm season can look a little in the subject.

In order for the design to look more interesting, it is worth adding additional effects. So how to make a real fire in the fireplace from the cardboard there is no possibility, you can simulate fire.

You can do this in several ways:

  • Using candles. They are placed in original candlesticks and placed in the depths of the fireplace.
  • You can take dry fuel. This method is suitable only for short-term use.
  • With the help of photo wallpapers. They are glued on the back wall of the design. It is worth choosing an interesting picture that would have a good print quality.
  • During installation, the electrical backlight is embedded or other electrical appliances that will mimic the flame in the fireplace.

To supplement the effect of naturalness, you can put in the fireplace of the trees branch, lamps. Such a decor will complement the overall picture, besides, a light woody smell will add a special festive mood notch.

Tips and recommendations

  1. Creating structures from cardboard, it is better to take universal metal guides to the trim. Such a durable frame will be a guarantee of a long service life.
  2. For facing, you can use a tile under a natural stone. Very interesting and originally looked mosaic from stone.
  3. You can make buttofa fire using red light bulbs.

To finish the decorative product it is worth choosing one of the ways:

  • You can paint the walls of the fireplace. Before applying paints, the surface should be scaled and cleaned with sandpaper.
  • Use self-adhesive film. Before sticking the film, the surface is putty and cleaned.
  • Lower with artificial stone. Such a cladding will look very interesting and exquisite.
  • Separate plaster. Often in the manufacture of plaster, thanks to this material you can simulate a brick or stone surface.
  • Separate by ceramic tiles. In order for the tile well on the surface, the plaster reinforced grid is used.
  • Use stucco. For the fireplace decor, you can take a polyurethane stucco, which is better to fix on the surface with the help of mounting glue.

Successful examples and options

If there is no experience in the construction of a decorative fireplace from cardboard yet, you can start with the easiest models. Such a fireplace is better to put in a small room.

White fireplace from cardboard on the eve of the New Year holidays will contribute to the festive atmosphere.

Falkintim from a cardboard box, covered by wallpaper, looks very original and cute.

Creating a fireplace from boxes.

Simple fireplace design with grille.

How to make a fireplace with your own hands, look in the video below.

Not everyone in the house and, moreover, there is a fireplace in the apartment. And sometimes you want to create a festive mood (so that there is to put gifts) or just want to make the room more cozy and chamber. In this case, you can create imitation. The easiest option is a fireplace of cardboard. Usually use packaging boxes from under large equipment.

False fireplace from cardboard: models

Falsh-fireplace from cardboard, as well as the real, can be used and angular. In both options, the portal can be straight or arched. As you like more. If we talk about the practical side of the case, straight easier to do, it is easier in the decoration. Even newcomer will cope.

What could be a fireplace from cardboard
What could be a fireplace from cardboard

A wall fireplace is perfectly suitable if there is a decent free section of the wall. He looks perfectly in the simpleness between the windows. If the walls are all busy, but there are angles, you can build an angular model.

What materials are needed

The best material is cardboard boxes. Make a fireplace from cardboard is the easiest way if there is a box from under a large monitor or TV. All you need - cut portal and glue the side walls.

Can be made of a large cardboard box or some small
Can be made of a large cardboard box or some small

A little more work will be if there are only small shoe-type boxes. But then you can collect a more interesting model in form.

Still need:

These are all materials and tools that will be required. Of the whole list, questions may occur only with respect to Scotch. Why paper? It is good at any finish. Including when painting. So the option is universal. If you paint the fireplace you are not going to, you can use the usual sticky tape.

You still need to finishing material, but we will talk about it later, since there is a lot of depends on the method of finishing.

Assembly options

If there is a big box

From a large cardboard box, you will get a fireplace with a rectangular portal. Samples are determined by themselves, but the optimal height is about 80-90 cm, the width is approximately the same, the depth is 6-15 cm centimeters. But there are models and wider, and already, and above, and below. All your taste. For example, a drawing of cardboard falsefin with dimensions.

Fireplace drawing from cardboard box
Fireplace drawing from cardboard box

Collect the simulation of the fireplace from the cardboard start from the central part. The first form columns. Cut rectangles in size - no problem. The problem make smooth bends in the right places. We take a large ruler or a flat bar and a solid object with a rounded end. For example, the ballpoint handle is suitable, you can take a spoon or fork and use the handle. The idea in the following - along the line, where the fold should be, apply a ruler / bar, carry out the back side of the ballpoint handle or the handle of the table appliance along the plank, pushing the cardboard. But see carefully, do not break. According to the applied sheet, the sheet is easily bends.

Cardboard fireplace parts
Cardboard fireplace parts

The central part is gluable or painted immediately. Then it will be too uncomfortable. You can paint black, as in the photo. Another option is to imitate brickwork. It looks good too.

It is convenient to glue the parts between themselves with a scotch (the type of scotch has already been discussed). We glue each connection from two sides. Scotchi do not regret. This fireplace from the cardboard was painted, because the columns were covered with white dense paper. You can use the primer, but on it put paint.

Almost done
Almost done

The shelf over the fireplace we turn out of several pieces of cardboard on the same technology. If you plan to set something, it is advisable to make rigidity ribs - a few partitions. If the whole design turned out to be durable and stable, you can make a shelf from a piece of plywood, for example.

If the cardboard is thin, the polystyrene / foam can be used. It is sold in construction stores. You can take the plates that go for the ceiling finish. They have treated edges, a drawing is applied to the front surface. In general, it may be interesting.

Next, it's a finish. In this embodiment, "bricks" cut out of the paper. They lay down the portal. Here you will need PVA glue. Do not forget between "bricks" to leave the seams. In the presented model, they are painted with basic color, but you can make them, for example, black, white.

Regulation of the portal
Regulation of the portal

The rest of the surface of the falsemine is painted, and the foam (polystyrene) moldings are glued on top.

That's what happened
That's what happened

Moldings can be glued to painting. You need to cut them with a sharp stationery knife. Then the cut will be smooth. Glues on PVA or special glue. Spend remnants immediately, otherwise the paint will be lying unevenly.

The same design can be saved by wallpaper "under the brick" or wild stone. Also fit self-adhesive film. But you need to work carefully - it will not work out.

If small boxes

With small cardboard boxes, it is not more difficult to work. They can be the same or different size, thickness and widths. Based on the existing set, the design is collected.

Here is what fireplace turned out of available cardboard boxes
Here is what fireplace turned out of available cardboard boxes

There are two ways:

  1. Pack the opening part of the boxes with scotch, then glue them with each other. Clay can use PVA. Bonded boxes are good to press each other, leave for 8-12 hours to dry the glue.
  2. Cut off the opening part, and together glue them with chock pieces.

    Glue the boxes with scotch from the back
    Glue the boxes with scotch from the back

The second option takes less time, but the design turns out unreliable. At large dimensions can be saved, flexing.

With cropped lids design is rolled
With cropped lids design is rolled

To give a penalty from cardboard boxes a presentable view, painting it "under the brick". To do this, the surface of a thick paper is grayish brown. This color will be background.

For coloring needed reddish brown paint and a large foam sponge. It can be trimmed by brick size - 250 * 65 mm. Paint the paint in flat dishes, make a sponge in it, applying it to paper and slightly pressing, draw bricks.

Draw bricks
Draw bricks

Working, it is necessary to ensure that the "seams" between the "bricks" were the same width. This is not an easy task - you will distract slightly, and the size is not the one. You can proceed easier - cut the paint tape for narrow strips, stick it, draw "bricks". After drying the paint scotch remove.

Here is such a fireplace of cardboard
Here is such a fireplace of cardboard

The upper part had to be reduced, as our fireplace turned out too rag. Better box use whole.

Fireplace with a round portal

His assembly is more time-consuming: you have to go well to cry. For this fireplace it took 4 large boxes (both from the TV).

Fireplace drawing of cardboard with dimensions
Fireplace drawing of cardboard with dimensions

Separately glued the base. From the inside of polystyrene stressed ribs. The weight turned out to be solid and the base without the amplification was fed. The strips set about 5 cm. They were glued to the greasy tape, then the base was sampled from all sides.

Then cut the front part and arranged the back wall. It is better to decorate right away until they glued. On the cardboard sheet transfer arched cutout. From the cardboard, cut "bricks" and glue them so that the edges do not go beyond the "arch". When the glue dries, we collect the main part of the portal. In the portal, we also install several rigidity ribs - with a high height, the cardboard can "play", and so it turns out everything is firmly and rigid.

Cardboard Fireplace Production Process
Cardboard Fireplace Production Process

The next step is the manufacture of the lid. It is multi-layered - cardboard, polystyrene foam, cardboard. Everything is labeled with glue, the load is installed. When the glue is dry (after 14 hours), the lid fastened on the design of the scotch. Next - finishing works.

To level the irregularities from the tape, you get all the surfaces with dense white paper. You can take the sheets of A4 format, it is possible - larger.

Next, the roll of paper towels and PVA glue. It is divorced 1: 1 with water, pour into the spray gun. We wat the napkin, lay, slightly squeezing. Wester thin paper itself gives relief, it is only a little corrected, seeking better effect. Similarly, we process all the surfaces, excluding "bricks". We wait until he dried.

This is the surface.
This is the surface.

We take the paint of red-brown and the color of the ivory (in this case). Brown paints "bricks", bright - the rest of the surface. Cardboard fireplace is almost ready. The finish strokes remained.

Here is a fireplace from cardboard
Here is a fireplace from cardboard

After drying, we pass all the brush slimmed in the gold paint. Paint brush, press, remove the paint residues on a sheet of paper again. We pass the "seams" between bricks, slightly assisted and "bricks". Next, in the same technique, we emphasize the surface texture. It is important not to apply too much paint. That's it. Cardboard fireplace ready.

Cardboard fireplace design ideas in photo-format

You can make a fireplace imitation from cardboard of any form. Several ideas are collected in this section. You already know the principles of assembly, the decor can come up with yourself or take advantage of ideas with photos.

Add your review
If you use good wallpapers "under the brick" will be very natural
Add your review
If you use good wallpapers "under the brick" will be very natural
From one large box will be medium in size fireplace
From one large box will be medium in size fireplace
A more complex shape and used polyurethane moldings are creating wonders.
A more complex shape and used polyurethane moldings are creating wonders.
Imitation of masonry from different bricks
Imitation of masonry from different bricks
If you use good wallpaper "under the brick" will be very natural
In the process…
High portal do quite just
High portal do quite just
In the process...
Decent option ...
Even with a chimney
Even with a chimney

You can make a fireplace from the boxes with your own hands for the New Year holidays. The caretaker will beautifully decorate the room, deliver joy to the child. Put the cardboard fireplace will be interesting not far from the Christmas tree, where the baby is looking for his gifts.

What you need to make a fireplace from cardboard boxes

For crafts, the cardboard is considered excellent material. When it comes to the fireplace, the best option is to find boxes. Packaging containers are emitted in grocery stores. You can look at home a big box, which remained from buying household appliances. Depending on the number of the quantity and size of the packaging container, the future design of the fireplace is design.

Decent option ...
Boxes are suitable for any size, but what they are less, the more need to collect them

Tip! A good workpiece is the packaging from the LCD TV. Flat and overall box is a practically ready-made fireplace. It is necessary to make a few slots, and the base is ready.

Decent option ...
Convenient to make a fireplace from a flat box from LCD TV

In addition to the boxes, you will need a minimum set of tools: scissors, knife, hot gun, line and pencil. It is important not to forget about the finish. Here you will need paints, colored paper. Wallpapers under the brick remaining after repair plastic panels, foam plinth and other similar materials are suitable.

Tip! To decorate the New Year's fireplace, you need to take care of the illumination. Use LED garlands, light bulbs for furniture backlight.

Fireplace size of boxes

Dimensions of the future crafts each determines for itself purely individually. Typically, the width and height of the false fireplace varies from 800 to 1000 mm, thickness - from 200 to 300 mm. Sometimes the dimensions are already determined by the dimensions of the found box. If you managed to get the packaging from the TV, it is easier to use it without resizing.

Decent option ...
The fireplace size often depends on the found box, but not more than 1 m in width and height

When assembling a fireplace of several boxes is also stupid each drawer to redo under a certain size. First, this is an extra work and time spent. Secondly, old bends can not be perfectly aligned. The box does not acquire a good rectangular shape.

Decent option ...
When using multiple boxes do not change their dimensions

On the video decorative fireplace with their own hands from the boxes indicating the exact dimensions:

How many boxes are needed for a false fireplace

The number of boxes depends on their size. If this is a big packaging from the TV, there is enough single box. However, you may still need small boxes for finishing, for example, when you need to make a stand, chimney.

Decent option ...
From under sweets or shoes you need at least 8 boxes

Middle-sized boxes from under sweets or shoes use minimum of 8 pieces. This is enough for the body. If the chimney is assumed, you need 2-3 boxes.

How to make a fireplace with your own hands out of the box

From cardboard boxes make two types of fireplaces: angular and rectangular. The first option is intended for installation in the corner of the room, and the second - lean to a smooth wall. Before deciding with the design, find free space for it. After that, it will be clear which fireplace from the box from the TV or small boxes needs to be done.

How to make a false fireplace from one box

The simplest fireplace will be from one box. However, it will be the main body. You still need to find three small boxes of the elongated form. They are needed to form a portal. As a decor, wallpapers are used with a pattern that imitates the brick. Self-adhesive film is suitable.

Decent option ...
Falsh fireplace decorate with wallpaper or self-adhesive film "under the brick"

For the manufacture of crafts perform the following steps:

  1. The bottom of the box is stuck with scotch, so that the shelves do not open. You can simply make tight paper.
  2. On the opposite side, one long shelf is rejected. It will remain on the outside, will perform the role of the speaker.
  3. The second long shelf and two short flaps are not rejected, but simply glue together. It turns out a small window that needs to be expanded and forming the portal. For this, three small boxes are led, put markings. The stationery knife cuts off extra pieces of cardboard.
  4. Inside the extended window insert boxes, plant on glue, forming a portal.
  5. From foam plates, the visor is cut, glued to the fireplace. It should be 5 cm to act beyond the boundaries of the main building.

The design is ready to decorate. The outer side is covered with wallpaper or film depicting a brickwork. Inside the portal you can decorate the paints of black and red color, create imitation of fire.

How to make a fireplace with chimney

A truly beautiful fireplace is obtained if it is equipped with chimney. It is through the tube on the legend of Santa Claus gives the baby gifts. The fireplace with chimney is optimally positioned in the corner to give it a bulk angular shape.

To work, there will be large sheets of dense cardboard and flat boxes from the TV. The presented master class of the fireplace from the box will help embody the idea:

  1. Four triangles are cut out of the cardboard sheets for the base. One side opposite the direct angle is spinning. On two billets from the strip are glued along the perimeter of the curb. Inside the plane glue stiffeners. Decent option ...
  2. The remaining two triangular blanks are close from above the resulting structures. The joints are sampled by a hot gun, strengthening scotch. Decent option ...

    Tip! If there are two flat boxes from the TV, it is enough to cut one of the corners, rounded the side of the triangle, then glue the side of the cardboard.

  3. Cardboard sheets cut off panels. Details form an angle, connect triangular elements. Inside the obtained portal from the ribs of rigidity and a rectangular piece of cardboard create the rear wall. Decent option ...
  4. The finished housing is painted with emulsion paint white, give time to dry. For scenery, paper, self-adhesive film or orange cardboard. First cut rectangular figures. According to the body, they are placed with a gap 0.5-1 cm. It turns out imitation of brick masonry. Decent option ...
  5. The next step is embarking on the manufacture of chimney. The main body is cut out of the sheets of cardboard. The front side give the semicircle. The back is formed by an angle of two cardboard blanks. Between themselves, parts are connected by rigid ribs. For this inside the chimney, vertically spaced strips are glued. Ribs will help save the desired shape. Decent option ...
  6. The finished chimney is painted with white water-emulsion. You can use thick paint, apply it with a rag or smeared with your hand to give an interesting texture. Decent option ...

When the paint is driving, chimney is installed on the fireplace body. The design is decorated with snowmen, dwarfs, garland.

Artificial fireplace of boxes with arch

The portal of the fireplace naturally looks like an arch. To form it better from the foam. The hull itself makes two cardboard boxes.

Decent option ...
Arched portal shape out of foam

For the assembly of the crafts perform the following steps:

  1. Two boxes of the same size combine among themselves into one large box, which will serve as a fireplace housing. Bonding procedures can be avoided if you find one bulk packaging from home appliances.
  2. From the thick plate of foam, the rectangular podium is cut on to which boxes are installed. The centered box is cut out the portal window. The top spins the arch. The side sides of the portal are sewn slices of foam plates.
  3. Top on the roof of the housing from foam plates glued a visor.

Since many details of foam, glued with their own hands white fireplace from the boxes is better in such a color and leave. The design is painted with water-free. The hearth inside decorated under brickwork. Rectangles can draw brown paint or stick cut out fragments from color cardboard.

Tip! To make it possible to optimally choose high-quality foam plates that will not crumble against touching hand.

How to make an angular fireplace from boxes

Literally in an hour a fireplace of an angular form is obtained if there is one box from the TV. It is only necessary to cut it right. Immediately it should be noted that the box is needed volumetric, that is, from a large TV.

Decent option ...
To form an angular fireplace, the box is cut off the back and combine the side shelves

Perform the following actions:

  1. A single wall is cut with a knife with a knife. Side shelves combine to turn out an angle 90 о. The joke is sick with a scotch or a hot pistol.
  2. From cardboard, a visor is cut in the form of an angular tabletop. The billet is glued to the top end of the case.
  3. On the front panel, the portal window is placed. It will look prettier if you give an arched form. The inner part of the portal is formed from the ribs of rigidity and cardboard walls.

The finished design is covered with wallpaper with a painter of bricks. The visor is better to issue a natural tree. For salary use self-adhesive film.

How to make a fireplace fireplace from cardboard boxes

A feature of this craft is the presence of firewood inside the furnace. The fireplace can be made by any examples considered above. So that decorative firewood was noticeable, the portal is desirable to paint black paint. In addition, it will be a good imitation of the soot from smoke.

Decent option ...
White lamps are clearly visible on a black background of the portal

For the manufacture of firewood, a corrugated material is needed. It can be obtained from packaging boxes, stratum cardboard into two parts. The size of future lanes is calculated so that they fit inside the furnace.

Decent option ...
Corrugated cardboard turn the tube

First, a large diameter tube is folded from the corrugated cardboard. The edge is glued so that the workpiece does not turn around. The resulting item will go to the main body is full. Now for similar technology, a small diameter tube is folded. They cut it with a stationery knife to pieces with a length of 3-4 cm. Scroll is made at an arbitrary angle.

Decent option ...
From small tubes form the bitch

It is glued to the large tube with a slashing of a blank of smaller diameter. The bitch is obtained.

Decent option ...
To obtain birch lanes, crafts are painted white paint

Finished lamps are painted with white emulsion. The ends leave brown, unpainted.

Decent option ...
Inside the furnace you can put natural sprigs, and the red glow garland imitate fire

Decor of the homemade fireplace from boxes

From the decor depends on how beautiful the handicraft will look like. A rich species gives the housing of the body with polyurethane foam elements. They are placed symmetrically, applying pre-markup. With such a decor, the fireplace is optimally painted in white.

Decent option ...
Polyurethane foam elements are glued symmetrically on the cardboard case
Decent option ...
On a completely white background stucco badly visible

To stucco stand out from a white background, it is painted in golden color. Additionally, the entire body is opened with a transparent water-based lacquer. With such a surface, it will be more convenient to wipe the dust without damaging the decor.

Decent option ...
Imitation for marble is performed by crumpled wet paper

It looks beautifully a fireplace shelf with imitation for marble. For this purpose, the surface is covered with a crumpled paper. The glue is no use. The paper is simply wet laid on the shelf. After drying, the texture will be saved.

Decent option ...
Liquid wallpaper decorated brickwork

It is better to transmit the imitation of the texture of the stone help liquid wallpapers. First, bricks cut from cardboard are glued inside the portal. Color the details with emulsion with the additive of the brown flatter. When the paint is driving, they apply liquid wallpaper.

Stock Foto Decorative fireplace from boxes

Decent option ...
New Year's fireplace decorate garlands, candles, christmas toys
Decent option ...
Polyurethane foam stucco or foam ceiling plinths will give a fireplace
Decent option ...
Under the furnace you can provide a niche and fill it with its real lanes
Decent option ...
Inside the firebox of a large fireplace, you can even hide a small locker
Decent option ...
Fireplace, decorated with stucco, stylishly looks not only in bright, but also dark design

Conclusion

You can make a fireplace from the boxes with your own hands not only for the New Year holiday. If you try with the design, the exercise will be the daily interior decoration. It is only necessary to remember that the design is still cardboard. It is impossible to expose it or put in the raw room.

The fireplace in the house is a symbol of comfort and heat. A fireplace made of stone is not even in every private house, and the owners of the standard apartment do not even have to dream of him. And you should always dream. If it is impossible to lay out a real fireplace, even a housewife can do its imitation. Such a simple and affordable material like cardboard will come to the rescue.

For the manufacture you will need unnecessary boxes, glue, scissors and fantasy. For decoration, different unnecessary remains of colored paper, foam and other materials that will be found in the house are suitable.

Sketch of the future focus

Before planning the manufacture of a cardboard fireplace, you need to explore the experience of those who have already embodied the idea of ​​reality. Photos of fireplaces from cardboard can be found in the Internet rubrics on the appropriate topic.

Planning:

  • Determination of a place for the future design. The most suitable will be an empty angle or wall.
  • Depending on the availability of free space, the size of the design is determined.
  • Making a sketch. It needs to put external and internal dimensions. Sketch can be performed in color by adding it alleged elements of the decor. These elements do not need to draw, you just need to determine the place for them. Such a fireplace scheme will allow you to see the future product in the completed version.

Thinking on decorative details, it is necessary to strive to ensure that the layout as a result was as much as possible to the real fireplace.

Manufacturing process

The basis of the fireplace design will be a cardboard frame. It is best to use dense cardboard boxes for its construction. Corrugated cardboard for packaging large household products will be the most appropriate. If the package is preserved from the TV, the perfect frame is ready.

Many ideas for fakes can be viewed on this site https://podelkimaster.ru/

In addition to cardboard, you must prepare:

  • Clay stationery and polymeric, which will be attached decor elements.
  • Wide scotch, it is better to take a greasy bilateral.
  • White paint. For dyeing cardboard, the most suitable will be dispersion.
  • Scissors and cutter will be required as a cutting tool.
  • Paint brushes and foam or sponge.
  • Old fabric napkins or flavors fabric.

Depending on the idea, other materials should be envisaged. For example, stucco from foam material. If there is a residue of liquid wallpaper, then they will have an application to create volume.

How to make a fireplace cardboard?

The assembly of the false fireplace begins with the manufacture of the central unit. First you need to form columns. To do this, cut the rectangular parts according to the dimensions.

It should be remembered that it is not difficult to cut cardboard, but to perform smooth more difficult work on it. In order to perform a smooth bend, a flat strap or a ruler and an object for fastening the bend are required. For this purpose, it will be quite convenient to use the usual spoon or handle.

The ruler is superimposed along the fold line, the cardboard is carefully rejected by the line and spend the line on the reverse side. It is necessary to do it carefully so that the fragile cardboard does not break through.

The central part is placed by paper or color immediately. After assembly, these actions will be problematic.

Ready parts are collected using a tape. As mentioned above, it is convenient to use bilateral scotch for these purposes.

In order for the product to be exactly scratched, you can apply white primer before applying paint. The primer layer will reduce the existing irregularities. After the cardboard does applied soil and will dry well, you can start staining.

The mandatory attribute of the fireplace is a shelf from above. It should be dense and solid. For the manufacture of the shelf, you will need to collapse the cardboard in three or four layers - the desired stiffness will be provided.

Alternatively, the cardboard for the shelf can be cut a bar from not thick plywood. Another din version of the shelves is a foam. Material is easy and durable. Such a shelf will also allow the fireplace frame to be copper.

Finishing options

An interesting option is the imitation of brick or stone masonry. To do this, you can pick up a self-adhesive film. In construction supermarkets such materials are sold. It is only necessary to calculate the size of the canvas and in the store to find the desired drawing.

If the product is stucked, the fireplace will look more interesting. For these purposes, remnants of ceiling tiles, foam plinths or stucco products are additionally purchased.

If desired, the fireplace can be decorated with additional elements. For example, a New Year's fireplace can be supplemented by LED lamps that imitate candles.

And finally, the most important thing is that it allows you to call the fireplace homemade hearth - this is a fire. Several logs wrapped by LED ribbon will make a hearth almost real. And on New Year's Eve, the flickering light of the fireplace will give the room a comfort and a festive mood.

So, sets out a simple and affordable, financially unscrewing version of the household facilities. It can be said that this is the basic instruction how to make a decorative fireplace. The basis is, and decorative decorative elements performs each to its taste.

Stock Foto Fireplace from cardboard do it yourself

We also recommend visiting:

POST Views: View Statistics 7 073.

The fireplace is always associated with comfort and comfort, so Even living in the apartment of a high-rise building, people often dream of creating such an original corner in one of the rooms. Cardboard fireplace with their own hands, made with love and accuracy, can replace the real fireplace in the interior, fully withstanding the style of design of the room.

Cardboard fireplace do it yourself
Cardboard fireplace do it yourself

It is necessary to immediately say that there is nothing particularly difficult in the manufacture of this element of the decor, and not only a man having a skill in construction, but also the owner of the apartment can be performed. Especially since work ne. Working and does not require Special devices и Tools . Maximum, what will be required for the process This is a fantasy with the external design of the fireplace, which can be easily diversified due to what on sale nowadays available large range Polyurethane foam decorative elements imitating stucco, columns and other decorations. If the sketch of the fireplace itself will be designed independently, and decorative parts will be correctly chosen, the design itself may turn out to be completely original and exclusive.

Preparation for the creation of the fireplace

Planning of the future fireplace

Before as Getting to work, you need to do a number of preparatory activities, without which it will be impossible to make this original interior decoration.

  • To begin with, the place of installation of the future fireplace is determined. Usually, an empty wall or angle is selected for it, where it will fit perfectly, unlike bulky furniture items. In addition, the fireplace can become an excellent cover for unsightly angles.
  • Further, the size of the future decorative structure is determined, which is calculated directly at the place of its installation.
For convenience in working at hand you need to have a drawing with dimensions
For convenience in working at hand you need to have a drawing with dimensions
  • The next stage Gone Drawing up a sketch of the future product on which all sizes are necessarily affixed. Such carefully prepared drawing It will help not be distracted by measurements already in the process of work. It is also recommended to make a fireplace figure in Completed form, desirable в Color That is, with all alleged decorative elements that will give it completeness. This drawing will help immediately determine the acquisition of all necessary parts and finishing materials. Not necessary accurately draw each of the elements of the decor It will be enough to determine their location location and approximately determine the dimensions.

When choosing a finish for the appearance of the fireplace, it is necessary to take into account the fact that this element of the interior must be decorated in the most thorough way. At guests who come to visit, even suspicion should not arise that ordinary corrugated cardboard served as the main material for the manufacture of this fireplace.

Materials for manufacture and necessary instruments

The following task to be solved in the process of preparing for work This is a selection of suitable materials.

For work, the simplest materials and tools will be required.
For work, the simplest materials and tools will be required.
  • For the manufacture of the case, you will need to get a large box of corrugated cardboard, which usually pack large household appliances Televisions or refrigerators. Since the boxes are usually after unpacking most buyers simply throws out, the main material can get at all Dive. Therefore, if this is conceived Cleather , it makes sense to appeal to familiar or neighbors with a request to give such packaging in the event of the acquisition of such equipment.

Yet One option Mining Boxes can be "duty" in the home appliance store. There you can agree with the buyer of the refrigerator that it is not in a hurry to throw away the packaging, since you free it from hassle and Brey her Then when it becomes no longer needed.

In a word, if the goal is set, it will definitely be achieved, If desired Imagine the developed projects.

  • In addition to cardboard, you will need two types of glue. This is polymer, Type "Dragon", for sticking polystyrene foam decorative elements, and Plow For the salary of cardboard and corners using pieces of fine paper.
  • You can use the painting wide scotch to use the corners, which is easy to purchase in any building stores.
  • It will take white water-based paint For priming and painting a finished fireplace.
  • Perhaps you will need transparent water varnish.
  • If the fireplace is multi-colored, then color additives will be required to give separate items. crafts The desired shade. In addition, you can buy some acrylic paint (under gold, silver, bronze and T.P. .), If any special decorative design of elements is conceived.
  • Some home masters use liquid Volume Wallpaper, to create on the surfaces of the future fireplace imitation of marble crumbs or other materials.
  • The decorative details themselves are purchased directly. These are moldings of the desired length and corners to them, columns and capitals, stucco elements and others.
For decorations used figured parts from polystyrene foam or polyurethane
For decorations used figured parts from polystyrene foam or polyurethane
  • A sponge and brushes of different sizes will be necessary for work, a long ruler and roulette, a stationery tape, a simple pencil. Under hand should always be dry clean soft rags.
  • In addition to the above, other materials may also be needed if they are provided for by the project. Everything you need can be purchased in the stores of the stationery and building goods.

The process of making the fireplace

To determine which fireplace is better suitable For a specific room, it is better to consider the production processes of two fireplace options Wasted and corner.

Fireplace from the boxes with their own hands: Step by step instructions with photosLooking for how to make a decorative fireplace with your own hands?

We suggest you familiarize yourself with the step-by-step guide on how to make a decorative fireplace from the old cabinet with your own hands. In addition, this material shows in detail the process of finishing the fireplace stucco and the stage of connecting the LED tape!

Wailed option

A wall fireplace is compact enough and not overlapping the room. In addition, the fireplace regiment, if you do her Enough tough It may well serve as a stand for decorative figures, candles, vases or hours.

Wailed decorative fireplace can become a fairly functional part of the interior
Wailed decorative fireplace can become a fairly functional part of the interior

First of all, you need to release a place to work where you can free on a large sheet of cardboard. Acting according to the sketch, in compliance with these on Nem. The sizes on the decomposed cardboard (former box) are marked and drawn all the details of the future fireplace. Conducting this process, you need to remember that box bends can also be used rationally and make them corners of the fireplace.

The fireplace is made of out three Compound This is the basis that should be enough tough , Fireplace portal and upper shelf.

Basis of the fireplace

The basis must be tough In order for the fireplace tightly on the floor, so the form for the foundation is necessary to strengthen well. This podium is strengthened with additional inserts - ribs Stiffness Fixed inside.

Rectangular base with rigidity ribs
Rectangular base with rigidity ribs

Ribs may be Collected B. Grid. , but may be And chaotic glued to the bottom and lid of the box.

Stiffness ribs can have a chaotic location
Stiffness ribs can have a chaotic location

The width of this part of the fireplace should exceed the length and width of the fireplace portal by 80 ÷ 120 mm. You can definitely decide on Accounting Masters and Square preferences on which the fireplace will be installed.

You can make the basis in two ways:

  • Clean the box with sides, install or glue on her bottom ribs Stiffness , PVA glue.
  • Cut from cardboard two identical panels of the desired size it will be bottom and the surface of the base. On the bottom are attached and pressed ribs Stiffness They can be glued with glue or double-sided tape.

The side surfaces of such a design consist of smooth strips that glue from two-three Layers cardboard that give extra rigidity Based. They are installed between the panels and glued to the greasy tape.

Expert opinion:

Masalsky A.V.

Editor category "Construction" on the portal Stroyday.ru. Specialist in engineering systems and drainage.

Ask a question expert

Making Stand - Foundation , you need to immediately think about how the portal will be recorded on the bottom structure, since it is sometimes fixed to the bottom panel of the base.

Most often, the portal is installed on the top plane of the base and then fastened with scotch.

Fireplace from a cardboard box from under TV
Fireplace from a cardboard box from under TV

Manufacture portal

Portal It is cut out of the boxes in advanced lines and can be manufactured in several ways: on a frame basis or with a solid rear wall.

First option

  • If the portal is arranged on a frame basis, the fireplace will have more Tough design, since frame partitions will be made of several Layers Cardboard glued together.
  • To begin with the front of the portal, to which the frame will be fastened, making all this detail of the design tough .
Decorative fireplace do it yourself
Cutting the windows of the future "hearth"
  • On cardboard Must be The window is posted for the future hearth. The upper part of the window is cut off by a stationery knife. Then the plane that is noted how the window is separated in half. The resulting "sash" bend inward They will become the inner side walls of the hearth.
Cutting windows of the future "hearth"
Blank of the portal with the opening of the "focus"
  • To make a ceiling of the hearth, a rectangle is cut out of the cardboard, the length of which is equal to width Focal, A. width width inland walls. This rectangle scotch is fixed in the ceiling spot.

As a result, the front of the portal is obtained. her It is necessary to strengthen from the inside frame.

Internal framework can be enhanced with dense cardboard jumpers
Internal framework can be enhanced with dense cardboard jumpers

Frame panels are sometimes manufactured from whole cardboard rectangles that glue together and dried under the press. Then they are attached to the front of the portal and are bonded with a painted tape or PVA and paper segments.

Another embodiment of frame partitions, which will make the fireplace easier by weight These are not a solid panel, but Grident Partitions.

A few windows for the shelves are cut on the back surface.
A few windows for the shelves are cut on the back surface.
  • Then on Hard Grid of Cardon Loves are glued Cardon in one layer.
  • The portal is mounted on the base of the podium and is fixed using painting tape or PVA and paper glue.
  • After Frame will be fully ready and enshrined Based on, it can be transformed using paint or sticking paper that closes all unsightly connections.
Rear wall of the fireplace with shelves before finishing
Rear wall of the fireplace with shelves before finishing

Frame can play a pretty role Reliable Shelves who will serve for storing needlework or other little things that do not use daily.

Shelves can be comfortable storage location all small things
Shelves can be comfortable storage location all small things

If the portal niches are planned to be used as shelves, then the walls, and the portal frame must be Hard , so they are also made of several Layers Cardboard glued together.

Second option

The second version of the portal is easier than the first, since the sizes installed in the sketch is the usual box. In this case, the rear wall will be solid and it can not be arranged in comfortable shelves.

Preparation of the portal with the opening of the "hearth"
The second version of the portal is simpler, as this is an ordinary hollow box

The box is also glued with painting scotch.

The front portion is formed from the cardboard strips cut in size. It will take three or four bands, depending on whether the lower part of the hearth is closed for several centimeters.

The second version of the portal is simpler, as this is an ordinary hollow box
Registration of the front wall of the portal "Fireplace"

Next, rectangular stripes are fixed on the sides of the box, and then on top and bottom between lateral stripes, forming a focus window.

The next step is the finished shape of the fireplace attached to the placed place on the surface of the podium, first grabbed with glue, and then reliable Fixed with painting tape or paper linings and PVA glue.

Installation of the fireplace shelf

If you do not strengthen additionally the top panel of the manufacturer's design, on HERE It is impossible to put any decorative decorations. Therefore, it is recommended to lay a fireplace shelf.

The fireplace will look beautiful only if there is an upper shelf
The fireplace will look beautiful only if there is an upper shelf

It should be remembered that this element should not be harder than the basis of the fireplace, since the whole design may fall. The weight of the fireplace shelf should be about the same as at the podium or even a little less.

It is best to make a shelf of two or three Carton sheets glued together. For the top layer, it is possible not corrugated, but the usual dense material.

Expert opinion:

Masalsky A.V.

Editor category "Construction" on the portal Stroyday.ru. Specialist in engineering systems and drainage.

Ask a question expert

Fireplace shelf glue better on polymer glue or "Liquid nails" So it will be reliable Pricing on Frame design or fireplace, arranged in the form of a box.

It is possible as a shelf to use the phaneer, a thickness of up to 10 mm, or a thin board made from Easy Tree. As an option - quite suitable Laminate panel.

Decoration

A very important stage is the transformation of the finished design in almost the "real" fireplace. It can be made to making ways, since the appearance of the fireplace will look like the master wishes.

First option

In this embodiment, decorative polyurethane foam elements are glued immediately to cardboard. The fireplace shelf from the front side and on the sides frame with a molding having a width of 10 ÷ 12 mm.

Registration of the front wall of the portal "Fireplace"
Start finishing - gluing decorative embossed parts
  • A thin molding is divided into separate zones, a niche of the focus is distinguished.
  • Further According to individual areas of the surface, symmetrically to each other, separate elements of stucco are glued.
  • In addition to them, decorative columns can be installed on the side sides of the portal.

All elements are glued to "liquid nails" or polyurethane glue.

  • The next step is the entire surface of the fireplace, including decorative parts, painted with water-free white paint. Work is carried out with the help of brushes and sponge, in order to clearly cry all the hard to reach places. As a result, you can get absolutely white design.
Fireplace after the primary application of water-level paint
Fireplace after the primary application of water-level paint
  • Then above the design you need to additionally work, for example, to cover moldings and stucco gilding or paint defined colors that can be made from the same Water Immulsions With the addition of a kole.
  • After Painting processes will be completed, recommended all the frontal and side parts to cover water based lacquer. It will protect the surface from various external influences, and will also make her More comfortable for cleaning, as dust with rough, painted water-level paint surface is removed quite reluctant.

Second option

Another embodiment of the fireplace using liquid wallpapers will give the surface of the fireplace relief, under the structure of natural materials.

But, before Apply the finishing mixture to the portal, it must be prepared and conduct measures to decorate the focus and the fireplace shelf.

  • Frontal and side surfaces, as well as a focal niche stained with waterproof paint and left to dry.
Start finishing - gluing decorative embossed parts
To begin with - also staining in the base color
  • Through the fireplace shelf is pasted thin paper or newspaper This is necessary for further design. When the surface is dry, her Also covered paint.
  • The next stage under the fireplace shelf on "Liquid nails" is fixed by molding, imitating stucco.
  • Next, you can move to the design of the fireplace. From corrugated cardboard, the required number of rectangles are cut out, which will mimic brickwork. They are glued in a niche of the focus, and the distance between the rows should be approximately the same and be 8 ÷ 10 mm. Details of this imaginary "masonry" must be glued to "liquid nails" or polyurethane glue.
To begin with - also staining in the base color
Formation of "brick masonry" from rectangular pieces of cardboard
  • After grazeing the glue, the brickwork is covered with water-mounted white paint.
  • Next step Gone Color "Bricks". To achieve necessary Shades, add to the water-mounted paint T T. Rebuable kel. Make, as a rule, several shades of color close to each other, so that the focus look more picturesque.
Formation of "brick masonry" from rectangular pieces of cardboard
Further go to the "liquid wallpaper" - they must pass the texture of the stone
  • Further, prepared "liquid wallpapers" are neatly applied to the prepared surface of the portal. To apply the mixture, use a spatula to her Distributed according to visible areas of the fireplace. Very gently need to apply wallpaper near polyurethane foam decorative elements. The mixture should close the bog between the surface and stucco.
Optional finishes of the upper fire shelf
Optional finishes of the upper fire shelf
  • Having finished working with the walls, you can move to the decoration of the fireplace shelf. IN Dann case used usual crumpled wet paper It will imitate marble surface. Wet paper is sprawling on the shelf, but the crumpled pattern will still remain.
Further goes "liquid wallpaper" - they must pass the texture of the stone
Relief figures can be toned "under ancient"
  • After drying paper and "liquid wallpaper", If desired , you can apply tinted with a soft brush stucco, and on the fireplace shelf A sponge, slightly touching the surface, so that it is just the protruding lines of the crumpled paper.
Relief figures can be toned "under the old days"
Fragments of polystyrene foaming will be suitable for creating the visibility of the "stone base"
  • The last stage of the transformation of the fireplace is to decorate the foundation. The role of the "stones" may well perform the usual foam, which is glued to "liquid nails", and is also covered with the addition of the selected tone.

Video: An example of creating a used fireplace from Cardon

Corner fireplace

Corner fireplace make it even easier than the wall. This will require in principle. Exactly the same Materials, and it can be decorated as the master wants. For decoration, the above-described polyurethane foam elements are also suitable in combination with paint and liquid wallpaper, or simply self-adhesive film .

Simple in the manufacture of an angle fireplace
Simple in the manufacture of an angle fireplace
  • Before making an angular fireplace, it is necessary to make a sketch and drawing . In order to He was accurate, remove the standards from the angle, where the decorative interior accessory will be installed. It is especially important to do this if the fireplace is placed In the furniture wall or it will be tortured to it. In this case, recommended triangle kartets to make equal width of the side panels of the furniture wall.
  • Next, the form of the fireplace is mounted in size from the box. If there was a big box, from HERE Make a smooth canvas, and the bends from the corners will be to help in the manufacture of a triangle for an angular fireplace.
  • From the box Forming triangular the form which is bonded by painting scotch tape at the top of the corner.
  • To the triangle stands well on the floor surface, you need to give it an additional rigidity . For this, at the corners from above and below, it is measured by about 100 mm and cuts are made using a knife.
  • Next, an even line is drawn from the inside that connects the angular cuts, and then a shallow incision is made along this line. It will help to make a smooth fold.
  • Exactly the same proce SS Pr. It is dying with two other sides of the triangle. Then the bands are bend, the excess of them is cut off, and the connections are glued together.
  • In the same way, the bottom part of the fireplace is made.
Cardboard base for the corner fireplace
Cardboard base for the corner fireplace
  • Next, you need to do from a separate piece of cardboard or paper the pattern size of the focus window. Then her Reduce from all sides to 70 ÷ 100 mm and cut out the reduced part. Her impose on a large plane of the received "triangle" The hypotenuse is outlined with a pencil and neatly cut with a knife.
  • Now it is necessary to make cuttings in the corners of the window, on the same 70 ÷ 100 cm, and then they need to be very gently inward The window at a right angle. Corners of the bend need to immediately take scotch.
  • In order to make the rear walls of the hearth, you will need an angle of the box, and for the ceiling and bottom Two triangles. The inner part of the "firebox" is measured According to having fun Opole .
  • For these sizes, the necessary parts are cut and glued together. The finished interior of the furnace is mounted in a niche of the fireplace, attaching a scotch to the bends that were made earlier.
  • For Stiffness The bottom of the furnace, under HERE Stands glued from several Layers Cardboard in the form of columns. Two such parts will be quite enough. They are glued between the lower plane of the fireplace design and the bottom of the furnace.
  • When the design of the fireplace is collected, you can start decorative design. IN Dann Case for transformation of the fireplace exterior used self-adhesive film imitating brickwork.
  • The salary starts from the inside of the design, those . From the hearth. The process must be done very carefully, trying to observe pattern to K. Brick Varki. Then is drawn up top part portal, then side Walls around the firebox, and last film glued in Nizhnya Region Fronton fireplace.
The fireplace regiment will complete the finish process
The fireplace regiment will complete the finish process
  • Next, cuts from cardboard or plywood, a fireplace shelf is separated and glued to the design surface, which will serve as an excellent surface for placing decorative figures or candles.

Learn how to make a fireplace in the apartment with your own hands, as well as consider step-by-step instructions, in our article.

Decorative firewood

Making a fireplace and installing it into place, you can think about accessories that can decorate it. As the fireplace not real The decorative firewood fields, which can also be made of corrugated cardboard are perfectly suitable for it.

Fragments of polystyrene foaming will be suitable for the creation of the visibility of the "stone base"
Such decorative "firewood" is easy to make independently

So that such woods decorated the fireplace firebox, you need to prepare the material and the necessary tools. This is a knife, scissors, glue, paint, thin twine and purified from the smooth top layer corrugated cardboard.

Work is carried out in stages and fulfill her quite simple.

  • Firewood depends on how much Volume Firecover firebox so that they fit well into this space. The desired length and width are measured on the cardboard, then the strips are cut off.
Such decorative "firewood" is easy to make independently
Production of "logs" and "branches"
  • Next, the material is folded into the tube. Her Thickness depends on the preference of the wizard It may be fat " Brevnyschko "Or" branch ", smooth or" bitch ".
  • After Tubes Rolled , the edge of the cardboard is labeled with glue pressed and tied Former until complete drying. It is better to use polymer glue in this case or "liquid nails". Billets for the Hields are immediately made several pieces.
  • Further From cardboard, thin "branches" are folded, which are placed, so as shown in the top photo. After drying the glue, the "branch" is cut into several "bitch", which are then glued to " Brevels "
Production of "logs" and "branches"
"Brevs" are complemented by "bitch"
  • When the glue dries, the finished hawts are covered with a thick layer of white paint, and then Breshs can Todded Under any tree of wood. For example, transverse Black Strokes of different widths on a white background will make them " birch firewood ", and dark brown stripes Applied along Brenen. They will show that "Firewood is angled" from "oak wood". For decorating Brenen. OK suitable gouache It is sufficiently thick and well combined with the water-level paint and, if necessary, thick or translucently blocks the white base.
"Brevels" are complemented by "bitch"
It remains only to paint the resulting "Hollows" in the desired color

If you turn on the fantasy, then in Flake You can make a safe backlight consisting of colored LEDs, which will be imitate smoldering or burning coals. From the fabric also make "flame languages", Inflatable The bottom is the weak power of the fan. They are highlighted by the right light, will perfectly imitate burning fire.

It remains only to paint the resulting "Hollows" in the desired color
The decorative fireplace can be revived by backlighting or "flame tongues"
The option to decorate a false fireplace from polyurethane
The option to decorate a false fireplace from polyurethane

Video: Tips for creating decorative homemade fireplace

It must be recognized that all materials for the manufacture of the fireplace and accessories for it are available at a price, so do not be afraid to spoil them. It is necessary to approach the process creatively and include your imagination, which may prompt additional design options. In the event that the master himself thinks decorative elements, then quite possible Get the exclusive version of the fireplace, which cannot be distinguished from the present.

Nothing makes Christmas twilight and New Year's Eve as comfortable as a fireplace with bright fire or smoldering coal. It warms his warm breath of pleasure, cold and such short winter days. If earlier the fireplace was used only in their direct intended purpose, that is, for heating, now it is one of the most spectacular and expensive decorative elements.

Unfortunately, it is not possible to establish a real hearth in each house, but there is a great way out - a fake fireplace from the boxes with your own hands for the new year. It is a wonderful decoration for an apartment or a private house, which can be created very simply by attaching a little effort and fantasy. In addition, such a structure helps to get rid of garbage in the form of cardboard boxes from under electronics, shoes, and even from fine cardboard packaging, from which you can cut "bricks". All New Year's holidays Artificial focus will complement the mysterious atmosphere of magical days.

The decorative fireplace can be revived by backlighting or "flame tongues"

How to make a fireplace from cardboard with your own hands

Before creating an artificial fireplace, it is necessary to determine its type. Depending on the availability of free space in the apartment and its planning there are several options for creating falsecamines:

  • Wasted. Such an artificial fireplace is located at the wall. It is very simple to create it, for this you do not need to have special skills;
  • Built-in. Is an excellent option if there is an empty niche in the apartment;
  • angular. An unclaimed angular zone formed by the walls may be occupied by such a design;
  • Island. Installed in the center of the room;
  • Mini-fireplace. "Baby" brings comfort and decorates a small room.

After selecting the appropriate version of the artificial fireplace, you should stock the necessary materials and start an interesting creative work.

How to make a fireplace from cardboard with your own hands

How to make a fireplace from cardboard with your own hands

How to make a fireplace from cardboard with your own hands

Necessary materials

The main material for creating falsefin is a dense cardboard. It is best to use boxes from under technology. In addition, it will be necessary (depending on the complexity of the intended project and the author's fantasy):

  • sticky tape (scotch);
  • acute knife;
  • pencil;
  • well sharpened scissors;
  • glue;
  • roulette (ruler);
  • Elements for decorating (disposable paper napkins and paint to create bricks or wallpapers with a corresponding pattern, real firewood or artificial log cards from corrugated cardboard, garlands or shimmering lamps "Candle in the wind", salt lamp).

The choice of decor depends on the author's imagination.

Performance

Creating decorative fake fireplaces, although a simple task, but requires accuracy, accuracy, patientity. For creative people, it's just a holiday, because you can give the will of your fantasy, creating your own, unique, the magic fireplace, from which Santa Claus will appear on New Year's Eve and fill socks hanging on the fireplace or put the boxes under the Christmas tree. Falexamine options are very much, the creation of each of them is distinguished by some nuances.

How to make a fireplace from cardboard with your own hands

How to make a fireplace from cardboard with your own hands

How to make a fireplace from cardboard with your own hands

Mini-fireplace from one box

Such an idea is perfect for people who want to decorate a small apartment. Even a toy fireplace of a small size, fitted with a tiny or a couple of Christmas tree toys, will create a feeling of the approaching new year and christmas. This design can be put on the windowsill, and it will fill the room mystical expectation of the miracle.

For the manufacture of the design, it will be necessary:

  • shoe box;
  • 3 small oblong boxes;
  • paint;
  • decor;
  • a piece of dense cardboard;
  • glue.

Mini-fireplace from one box

Mini-fireplace from one box

Step-by-step instruction:

  1. The bottom of the shoe box is bonded by glue and scotch.
  2. A long blade is flexing on the outer side. Subsequently, it will become the protruding base of the mini-fireplace.
  3. The second long flap fasten with two short. It should turn out the window.
  4. All over its perimeter, small boxes are applied and put markup.
  5. Boxes are cleaned, the window increases, removing the extra cardboard.
  6. Little boxes are placed in place of marking, creating a focus portal.
  7. A shelf is cut out of plastic or foam plastic, which should form a visor, so it is made by 5 cm lonters of the falsymina itself.
  8. The resulting small fireplace is painted on each side. Inside the hearth glue the wallpaper or self-adhesive film "under the brick".

At the end, the fireplace decorated with christmas toys, candles, garland.

The decorative fireplace can be revived by backlighting or "flame tongues"

Mini-fireplace from one box

Fireplace with neckline in the form of arches

For the manufacture of such a variety of artificial fireplace, two boxes will be required, the same in size. They are connected together so that it turns out a large box or box. All connections are sampled and additionally fastened with scotch.

In order to make a fireplace from cardboard with your own hands for the new year, step-by-step instructions implies the following actions:

  1. The podium for the fireplace is formed from the foam, which is installed.
  2. Separately from the sheet of paper cut the arch portal for falhablemin. The size of the window must correspond to the size of the artificial fireplace itself.
  3. The template is applied to the front of the structure, placing symmetrically so that the future portal is located exactly in the middle.
  4. It is reduced by a pencil, and then cut out with a sharp stationery or scissors to the fireplace in the form of an arch.
  5. The fire shelf is glued on top, decorative plinth.

At the end, the entire design is placed by paper, and then create a brickwork imitation cut from cardboard "bricks", wallpaper or self-tech outside and inside.

The decorative fireplace can be revived by backlighting or "flame tongues"

Fireplace with neckline in the form of arches

Fireplace with neckline in the form of arches

Fireplace with neckline in the form of arches

Corner fireplace from chimney cardboard sheets

To create such an artificial design, it is imperative to pre-measure the angle in which the fireplace will be installed. It is necessary to ensure that he does not speak, as it will constantly interfere, but it is impossible to do so that the fireplace is shorter than the protruding walls. So the feeling of its depression in the angle will be created.

To create an angular fireplace, several sheets of durable cardboard will be required. Instruction:

  1. 4 semicircular triangular blanks are cut out of the cardboard. One of them is glued a wide cardboard strip (curb) along the entire length. It turns out a box.
  2. Inside insert thick cardboard or wooden dranco for stiffness of construction. The second part of the design is glued on top.
  3. The same is done with two other billets. For reliability, all joints are additionally sickling with scotch.
  4. After the top and bottom of the future fireplace are ready, they are connected by side walls made of dense cardboard (several layers of cardboard can be folded together).
  5. The place of the joint of two "sidewalls" is fasten with a glue gun and additionally scotch.
  6. From the inside the joint is closed with a bar, which performs the role of an additional rigidity ribs, and then a rectangular piece of cardboard.
  7. The design is ground and painted with white paint.
  8. "Bricks" are neatly cut from the cardboard. Moreover, to create a contrast pattern, internal "bricks" is better to do shorter and wide, painting in a pale pink color. And for the outdoor decoration of "bricks" it is necessary to cut narrower and long, painting them red.
  9. Start creating a false chimney. For its manufacture, 2 angular rounded parts will be required. The lower should coincide in size with the surface of the fireplace, and the upper one is a bit already, as the chimney must narrow up.

The decorative fireplace can be revived by backlighting or "flame tongues"

Corner fireplace from chimney cardboard sheets

Corner fireplace from chimney cardboard sheets

At the end, two angular semicircular parts are connected by side panels, reinforcing them with additional ribbies. The facial part of the chimney is made from the sheet of cardboard. The fake chimney is painted in any color and attach to the design.

Cardboard fireplace decor

To complete the simulation of the real acting fireplace, it is necessary to obtain the resulting design from the outside and from the inside. It is difficult to believe, but even the artificially created focus can emit heat if it is properly arranged to get it. Options for creating light flames Multiple:

  • LCD monitor. If an island fireplace is created, which is located in the center of the room, you can insert a LCD monitor to the portal, when you turn on the flame language;
  • picture. Another option to decorate the hearth is the printout of the bright flame image and its subsequent gluing to the rear wall of the furnace. Inside the hearth, candles with artificial flickering fire are placed;
  • Garland, candles, salt lamp. The effect of light dispersion creates garland placed in a matte glass bottle. In the middle of the focus you can also put several artificial candles with a flickering flame or a salt lamp, which in addition to the excellent flame effect will also redee the air indoor. Salt lamp should be masked with small lamps or twigs of trees.

Cardboard fireplace decor

Cardboard fireplace decor

Cardboard fireplace decor

Such an imitation will create a romantic atmosphere. The presence of a glowing fire, which, as if burns from warmth and cozy closes his reddish eyes, will create indescribable comfort in a cold winter night.

To create an imitation of a bright flame inside the focus to each wall, the mirror attaches or glue the walls with a film with a mirror surface. All over the perimeter of the focus lay the bright garland of yellow-orange color.

Effect of wood

An important attribute is the imitation of a burning, glowing tree. To create a brother of a small diameter, they cut it in half, and then for a few smallers smaller. Make it all this by the side, and insert the garland rolled into the ball into the ball, alternately shimmering with red or yellow. Small pebbles, seashells, who perfectly combine with artificial fire are poured into the hearth.

Effect of wood

Effect of wood

If there is no desire to use a natural tree, imitate lamps easily using corrugated paper. It is folded into the rolls of various diameters and length, they fix the paper to do not unfold, on top paint with white or gray paint with black stripes. As a result, it turns out an excellent imitation of birch lanes. It looks original in the focus of artificial ash. It can be created, repainting the usual fine sand into gray-white, black shades.

The decorative fireplace can be revived by backlighting or "flame tongues"

The decorative fireplace can be revived by backlighting or "flame tongues"

Decorative grille

Beautifully look and fake openwork grille in the fireplace firebox. It can be created from slices of a two-core cable. It is necessary only to bend them into a spiral or in the form of an inverted Latin letter "C", fasten at the entrance to the portal, paint black or silver paint, and almost the real "cast-iron grille" of the fireplace is ready!

Mantel

Decorative brickwork can also be made in different ways. The easiest of them is to stick wallpaper or self-adhesive film with brickwork imitation. You can paint the whole fireplace of red paint, and then make the lumen between the "bricks", drawing gray stripes.

Handmade experts perform brick imitation, simply wetting the usual sponge for washing dishes in red or orange paint and applying it to the design surface in a checker order.

The most time-consuming, but qualitative way, allowing to create the effect of a plastered embossed brick surface of the fireplace, is cutting "bricks" from dense cardboard. To do this, cut a sample of "bricks" so that he carefully looked in the overall "masonry" of falsemine. It makes a large number of "bricks" so that they can be covered with the entire surface and the inside of the fireplace.

Mantel

Mantel

Mantel

Further, all the "bricks" are glued in checkers with the help of PVA glue to the fake fireplace. After that, disposable napkins of red, red, white, white (it all depends on how the color is the fireplace). The surface of the glued cardboard "bricks" is lubricated with glue and gently apply napkins to them, carefully stroking the tassel so as not to be broken. Under the influence of glue, napkins are literally melted, and falling, form a surface like a soft plaster, to which it is very pleasant to touch. Having finished the entire surface of the fireplace with napkins, it is necessary to let it dry. The effect will be amazing!

Finally, a fireplace regiment needs decorating. On the eve of the holiday, it is possible to put a dressed small Christmas tree on it, stick the foam crafts in the form of angels, nearby mandarins. Or disrupt several pine twigs, sprinkle with mandarin, grapefruit or orange oil. Decorate the shelf by Mishur, sparkles, bumps, hang socks for gifts. All this will create a magical, and the sweet feeling of an approaching beloved holiday! Artificial homemade fireplace from cardboard, made with love, will give a sense of the holiday, magic and magic in winter evenings.

Mantel

Mantel

Mantel

How to make a fireplace from cardboard with your own hands (+90 photos): Step-by-step instructions and master classes

How to make a fireplace from cardboard with your own hands

It is hard to find at least one person who is not thinking about how to make your home cozy. One solution to this task is to create a fireplace from cardboard with your own hands. Find out how best to make more detailed further in the article.

How do you make big flowers from corrugated paper with candy. Step-by-step master class + 75 photos of luxury bouquetsSee also: How do you make big flowers from corrugated paper with candy. Step-by-step master class + 75 photos of luxury bouquets

How to pick up Cardboard

To collect it, it is necessary to choose the materials and allocate for about 5-6 hours. It is not necessary to do this very much, to do it yourself is not as difficult, so the whole family can take part in the process.

Make a fireplace with the whole family

Make a fireplace with the whole family

Quality and view will depend on the material and type of cardboard boxes. If you take the packaging from the TV, "Falekintin" will be narrow without much deepening in the place where burning firewood are located. Therefore, wide boxes are most often used, at least 50 centimeters deep into. It is also desirable to use the most durable cardboard, in this case, you can make a stand from a tree from above.

Choose durable cardboard

Choose durable cardboard

If there is a desire to make a more complex design, it is recommended to prepare 2 more boxes of different sizes. This will expand the possibilities for creative idea. It is also worth taking care that drawings easily applied on paper. They should be well visible, since in case of an error, you will have to look for a new material.

Complex design of several boxes

Complex design of several boxes

Frequently used 3 species "Faleximinal", namely:

1Christmas with New Year's decorations.

2Corner focus.

3Standard wall.

For each of them it is necessary to select a certain amount of materials and types of cardboard boxes. To make the design more stable and reliable, can be placed inside the wooden frame. It will be relevant in the family in which young children grow.

Christmas featured

Christmas wall fireplace

How to make flowers from corrugated paper with your own hands. Top 6 simple master classes + 125 photosSee also: How to make flowers from corrugated paper with your own hands. Top 6 simple master classes + 125 photos

How to make a fireplace in honor of the Christmas holidays

To make a Christmas hearth, you will need only 3 cardboard boxes, one of them should be big and 2 others smaller, but the same. The first is installed on the center, while others at the edges. Next, items glued with scotch or reliable glue.

Creating a frame for the future fireplace

Creating a frame for the future fireplace

If the house did not find the boxes of the same in height, they cut. At the same time, the upper part should not have failures.

The room where the fireplace will be installed, it is desirable to use the same where a fir will be, it will create more comfort and a festive atmosphere.

The first thing to be done is to remove the front of the wall at a large box, which is in the middle, there will be a flue hole. The fireplace can be put on a pre-prepared border, so it will look much more effectively.

False fireplace with border

False fireplace with border

If there is a desire to make artificial bricks, you can use a thin foam. It needs to be placed and cut rectangular shapes, the size of a little less than standard bricks (if the value allows you to use the original stone sizes).

Decorative brick do it yourself

Decorative brick do it yourself

Now you can proceed to gluing foam. Bricks need to be placed in a chess order so that the masonry is as close as possible to the present. After the work done, the glue must be frozen, only after that the work can be continued.

Polyfoam gluing to the fireplace

We glue foam to the fireplace

Now you can start painting. It is preferable to primitive in a few layers so that all parts have the same color. . Bordur usually paint in yellow, and bricks in red or in golden. If the owner wants to make a hearth not only for New Year holidays, you can buy brown paint.

How to decorate a New Year's fireplace

To decorate the Christmas hearth, use various toys and natural materials, for example:

  • Fir branches.
  • Bumps.
  • Balls.
  • Rain.
  • Christmas socks for gifts.
  • Fruits.
  • Candy.
  • Bells.
  • Figures of Santa Claus and Snow Maiden.
  • Paper snowflakes.
  • Garlands with backlit.

[/ WPSM_BOX]

Toys and decorations for christmas focus

Toys and decorations for christmas focus

You need to apply suitable colors. It is recommended to use green, red, golden, blue or white or white decorations, as well as their shades.

Crafts from paper sheet do it yourself with step-by-step instructions. Top 7 best master classes + 130 photosSee also: Crafts from paper sheet do it yourself with step-by-step instructions. Top 7 best master classes + 130 photos

How to make a wall fireplace

This species common among people living in apartments. He does not take a lot of space and fits well in any interior. To make a fired hearth from cardboard boxes, the following tools and materials will be required:

  • stationery knife;
  • sponge, brush or other tool for accurate painting;
  • Reliable glue (recommended "moment" or glue for plastic products).
  • Construction Scotch;
  • Putty or water-level white paint;
  • Cardboard boxes (if possible, large packaging from under the refrigerator, widescreen TV or washing machine) is more suitable for the fireplace).
  • paper;
  • pencil or thin marker for drawings;
  • line;
  • Polyfoam for creating a stand and other decorative elements.

When creating a drawing on paper, it is desirable to designate not only the main construction products, and the decorations.

Sometimes the owner has no big box pairs, but there are many medium. In this case, they can be accurately glued and do almost the same.

When the sketch is ready and applied to paper, you can begin to transfer it to cardboard boxes. For convenience, basic and auxiliary lines are applied with different colors of handles or markers.

Think over each stage so that you miss anything

Think over each stage so that you miss anything

Next, make a flue hole. To do this, take the knife and cut it in the center of the box. It is very important not to forget to leave a part of the front wall above and on the sides to glue it to the back and close the empty space.

Finishing work

After the work on the creation of the main frame is complete, you can begin trim. Here you can use anything, depending on the idea. Usually it is glued with original wallpaper or packed paper. If there are people in the family who are well drawn, you can apply beautiful patterns or draw thematic drawings in honor of any holiday.

Use favorite material for finishing the fireplace

Use favorite material for finishing the fireplace

If you want to make a standard fireplace, you can use foam bricks, as well as in the case of a Christmas hearth. Remember that artificial stones can be pasted not only on the outside, but also inside, where the flame is usually burning.

To decorate the front part, in the store you can purchase special figures in the form of flowers, angels and other things. They are made from lightweight material, so never fall apart, even when using conventional PVA glue.

Decorate the fireplace of various decor from the store

Decorate the fireplace of various decor from the store

To install the shelf from above, you must first glue the plinth in its edges. In this case, it is advisable to use as original products as possible. As a shelf, you can apply a wooden sheet of plywood or other material, the main thing is that it is not too heavy. If the frame is not additionally strengthened, there is a risk of destruction of the design.

Measurements of the fireplace shelf must be carried out only after the plinth is installed, if cutting it under the size of the fireplace itself, it may not come up.

Painting

Almost 90% of people who make a fireplace for an apartment from cardboard with their own hands, paint it with white water-emulsion paint. But if you approach the question creative, you can betray a hearth vintage and apply an ordinary putty for drywall (after applying it is necessary to dry the coating with a construction hairdryer).

If it's still decided to simply paint a homemade fireplace, you can use a simple brush, and the sponge is necessary to cover the paint of the most hard-to-reach places.

Fireplace from cardboard

The easiest option is to just paint the fireplace in white

Warmed almost ready, it remains only to decorate it. Inside, you can set a photo of the present flame, and in the furnace add real or homemade firewood. Sometimes people install candlesticks on the shelf, it looks very impressive and gives the feeling of the antiquity.

Decorate with all festive attributes

Decorate the fireplace by all festive attributes

How interesting, stylish and originally decorate the room for the new 2020 rats with your own hands (230 + photos): incredibly beautiful interior things in every homeSee also: How interesting, stylish and originally decorate the room for the new 2020 rats with your own hands (230 + photos): incredibly beautiful interior things in every home

Create an angular option

The layout of some apartments involves the formation of an angular part in the most prominent place. As a result, the family thinks for a long time than you can decorate or hide this deficiency. One of the solutions is the manufacture of a corner fireplace. The design is not over complicated, so all family members can take part in the work.

Corner fireplace do it yourself

Corner fireplace do it yourself

To begin with, it is necessary to prepare the following materials:

  • Transparent Scotch.
  • LED ribbon, garland or candles on batteries for decoration.
  • Construction knife and large scissors.
  • Film self-keeper or wallpaper with a painter of bricks.
  • Cardboard box, size above average.

The first step is measurements and definition of the number of cardboard, which will be needed to complete the corner. If the fireplace is less, the impression that it is depressed in the angle. If the problem part is on the transition from one room to another, the design will not only create comfort, but will avoid shocks about the doorways.

The easiest option is to just paint in white

Calculate measurements for the future fireplace correctly

How to decorate

When the triangle is ready, it is necessary to firmly glue with scotch. If the design allows, the focus is placed by the film by self-tier. To decorate a homemade fireplace, you can use wallpaper with different drawings.

Make a hard frame for stability

Make a hard frame for stability

Now it's time to make the manufacture of shelves. If there was no plywood or other suitable solid material at hand, the remaining cardboard is suitable. The only condition is to make it more durable, you need to use several layers. For finishing, the stand usually apply self-keys under the tree.

Boldly glue thematic wallpaper and decorate

Boldly glue thematic wallpaper and decorate

Next, we are decorated with the inside. To make a homemade fireplace from within, previously harvested electronic candles, garlands or LED tapes are used. They can be folded inside and cover with artificial firewood, which will create a combustion effect. This focus can also perform a nightlight function.

How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)See also: How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)

Making a solid foundation

The lower part of the homemade fireplace, which serves as a stand, should be durable and tough, since in addition to the weight of the structure, it must withstand all items installed on the center for a long period.

You can strengthen the lower border with the help of additional inserts, they will be fixed inside the cardboard frame. Such "ribs" can be placed along the entire length through certain intervals or simply stick chaotic throughout the bottom.

Strengthen all parts for design reliability

Strengthen all parts for design reliability

Strengthening inserts must have the same height, otherwise the weight will be distributed unevenly, which will affect their holding ability.

The lower part in the form of a stand should always be longer and wider than the main design of the focus, by about 100-120 mm. To make a support, you can use the 2 most simple and efficient ways:

1Cut from cardboard two identical sheets (bottom and upper part). One of them is pasted "edges" to support the fireplace. Here you can use bilateral tape or glue;

2Find a flat box with sides and set inside strengthening inserts.

Easy way to make your own hands

Easy way to make a fireplace with your own hands

How to decorate a stand

Like any other element, the stand needs decoration. The simplest thing you can do is pick up the original side panels for it, plane the cardboard with self-tapping with the pattern, wilt into the wallpaper or paint. But there are other, more original ideas.

Self-stick with a pattern in the design of the fireplace

Self-stick with a pattern in the design of the fireplace

If the homemade fireplace was made in honor of the Christmas holidays, the foundation can be painted in red or white and tighten the rain with a garland.

Step by step we create imitation

Step by step we create imitation

For standard, people often use wide plinths with beautiful patterns. They can be bought in any construction store and install in the lower and top of the focus, it always looks very beautiful and holistic.

Elegant fireplace with a wide plinth

Elegant fireplace with a wide plinth

Video: The most beautiful fireplace do it yourself

Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)See also: Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)

Photo Gallery: Original ideas for creating a fireplace with your own hands

9Total Score.

A homemade fireplace of any kind can make every person who has no experience in construction. Also, such a focus will allow you to make an apartment or a house more comfortable, and in New Year's holidays will create the necessary magic atmosphere. It is worth noting that Christmas or other photographs next to the fireplace are always experiencing spectacular and remembered for life.

If you do not agree with the ranking of the article, then simply put your estimates and argue them in the comments. Your opinion is very important for our readers. Thank you!

Accuracy of information

8.5.

9

The relevance of information

  • pros
  • Original decor do it yourself for your home
  • You can make the whole family

Realization of creative ideas

  • Minuses
We will need certain materials and skills.

Добавить комментарий